Coverart for item
The Resource Advanced research on information science, automation and material system IV : selected, peer reviewed papers from the 2014 4th International Conference on Information Science, Automation and Material System (ISAM 2014), August 23-24, 2014, Wuhan, China, edited by Helen Zhang, M. Han and X.J. Zhao

Advanced research on information science, automation and material system IV : selected, peer reviewed papers from the 2014 4th International Conference on Information Science, Automation and Material System (ISAM 2014), August 23-24, 2014, Wuhan, China, edited by Helen Zhang, M. Han and X.J. Zhao

Label
Advanced research on information science, automation and material system IV : selected, peer reviewed papers from the 2014 4th International Conference on Information Science, Automation and Material System (ISAM 2014), August 23-24, 2014, Wuhan, China
Title
Advanced research on information science, automation and material system IV
Title remainder
selected, peer reviewed papers from the 2014 4th International Conference on Information Science, Automation and Material System (ISAM 2014), August 23-24, 2014, Wuhan, China
Statement of responsibility
edited by Helen Zhang, M. Han and X.J. Zhao
Title variation
ISAM
Creator
Contributor
Editor
Subject
Genre
Language
eng
Summary
Collection of selected, peer reviewed papers from the 2014 4th International Conference on Information Science, Automation and Material System (ISAM 2014), August 23-24, 2014, Wuhan, China. The 92 papers are grouped as follows: Chapter 1: Material Science, Processing and Technologies, Chapter 2: Applied Mechanics, Mechanical Engineering, Electrical and Electronic Engineering, Chapter 3: Applied Information Technologies, Network, Data Processing and Computational Methods Keyword: Automation, Materials, Energy and Environment, Mechanical Engineering, Applied Mechanics, Information System, Applied Technology These proceedings contain 92 papers from the 2014 4th International Conference on Information Science, Automation and Material System (ISAM 2014), held in August of that year in Wuhan, China. Computer science, technology, engineering, and other researchers from Asia and elsewhere address topics in the areas of materials science, processing, and technologies; applied mechanics, mechanical engineering, and electrical and electronics engineering; and applied information technologies, networks, data processing, and computational methods. -- Computer science-- Information science-- Materials science
Member of
Cataloging source
E7B
Dewey number
620.11
Illustrations
illustrations
Index
index present
LC call number
TA401.3
LC item number
.I584 2014eb
Literary form
non fiction
http://bibfra.me/vocab/lite/meetingDate
2014
http://bibfra.me/vocab/lite/meetingName
International Conference on Information Science, Automation, and Material System
Nature of contents
  • dictionaries
  • bibliography
http://library.link/vocab/relatedWorkOrContributorName
  • Zhang, Helen
  • Han, M.
  • Zhao, X. J.
Series statement
Advanced Materials Research,
Series volume
Volume 1022
http://library.link/vocab/subjectName
  • Materials
  • Automatic control
  • Information technology
  • TECHNOLOGY & ENGINEERING
  • TECHNOLOGY & ENGINEERING
  • Automatic control
  • Information technology
  • Materials
Label
Advanced research on information science, automation and material system IV : selected, peer reviewed papers from the 2014 4th International Conference on Information Science, Automation and Material System (ISAM 2014), August 23-24, 2014, Wuhan, China, edited by Helen Zhang, M. Han and X.J. Zhao
Instantiates
Publication
Copyright
Bibliography note
Includes bibliographical references at the end of each chapters and indexes
Carrier category
online resource
Carrier category code
  • cr
Carrier MARC source
rdacarrier
Color
multicolored
Content category
text
Content type code
  • txt
Content type MARC source
rdacontent
Contents
  • Advanced Research on Information Science, Automation and Material System IV; Preface, Committees and Sponsors; Table of Contents; Chapter 1: Material Science, Processing and Technologies; The Composition Cement Binder with the Use of the Synthesized Aluminosilicates; Metallogenic Features Modeling and Deep Mineral Exploration of Laochang Ore Field in Ge Jiu; Projection Method for Material Selection Problem with Interval Numbers; Grinding Wheel Abrasive in Material Selection Using Fuzzy Grey Relation Analysis Method
  • Polyaniline Composites Using Three Different Acid as a Secondary Dopant: Preparation and PropertiesStructure of Smart Materials and its Application in Construction Industry; The Study on Mechanical Properties of POSS Hybrid PVA Hydrogels; The Swelling Behavior of Water-Soluble POSS Hybrid PNIPA Nanocomposite Hydrogels; The Mechanical Properties of Inorganic/Organic Co-Crosslinked PDMAEMA Hydrogels; Research on Strain Gauge Protecting-Process to Measurement Data Accuracy of Composite Material Structure; The Mould Flux Viscosity Designing of High Carbon Steel for Thin Slab Continuous Casting
  • The Mould Flux Crystallization Properties Designing of High Carbon Steel for Thin Slab Continuous CastingEffects of Impurities on Silicon Dioxide Dielectric Properties; Unfolding Method of Non-Developable Surface for Sheet-Metal Design; The Clinical Application and Evaluation of Artificial Cruciate Ligament Materials for Knee Exercise Injury; Application and Realization of Digitization of Traditional Metallographic Microscope; Characteristics of Electron Structure and 4f Orbital of Rare Earths and Their Reinforcement of Wastewater Degradation
  • Applied Technology in Using HPLC for Determining Aflatoxin Contents in PeanutsChapter 2: Applied Mechanics, Mechanical Engineering, Electrical and Electronic Engineering; Simulation on the Behavior of Individual Vehicles with Influence Evaluation of Flow Rate and Speed Limits on Freeway; Effect of Jet Hole Size on Drag Reduction Performance of Bionic Jet Surface; Optimization of Horizontal Plate Fin Heat Sink in Natural Convection for Electronics Cooling by Simulated Annealing Algorithm; Error Analysis of a Non-Contact Parallel Plane Sensor Based on Monte Carlo Method
  • The Leakage Causes and Improving Measures of CB Series of Gear Oil Pump Based on Mechanical MechanicsDesign and Implementation of AES Key Generator Based on FPGA; Study on Double Long-Primary Short-Secondary Linear Induction Motor for Magnetic Elevator; Experimental Hydro- and Aerodynamics Research on Arrow; Analysis for Nonlinear Aeroelasticity on Structure and its Current Progress; Simulation on Magnetorheological Suspension Structure of Automotive; The Formation of Temperature Controller by PSoC; Research on the Work Space Optimization of the Six Bar Parallel Machine Tool
Control code
893685591
Dimensions
unknown
Extent
1 online resource (433 pages)
Form of item
online
Isbn
9783038266341
Media category
computer
Media MARC source
rdamedia
Media type code
  • c
Other physical details
illustrations
Specific material designation
remote
System control number
(OCoLC)893685591
Label
Advanced research on information science, automation and material system IV : selected, peer reviewed papers from the 2014 4th International Conference on Information Science, Automation and Material System (ISAM 2014), August 23-24, 2014, Wuhan, China, edited by Helen Zhang, M. Han and X.J. Zhao
Publication
Copyright
Bibliography note
Includes bibliographical references at the end of each chapters and indexes
Carrier category
online resource
Carrier category code
  • cr
Carrier MARC source
rdacarrier
Color
multicolored
Content category
text
Content type code
  • txt
Content type MARC source
rdacontent
Contents
  • Advanced Research on Information Science, Automation and Material System IV; Preface, Committees and Sponsors; Table of Contents; Chapter 1: Material Science, Processing and Technologies; The Composition Cement Binder with the Use of the Synthesized Aluminosilicates; Metallogenic Features Modeling and Deep Mineral Exploration of Laochang Ore Field in Ge Jiu; Projection Method for Material Selection Problem with Interval Numbers; Grinding Wheel Abrasive in Material Selection Using Fuzzy Grey Relation Analysis Method
  • Polyaniline Composites Using Three Different Acid as a Secondary Dopant: Preparation and PropertiesStructure of Smart Materials and its Application in Construction Industry; The Study on Mechanical Properties of POSS Hybrid PVA Hydrogels; The Swelling Behavior of Water-Soluble POSS Hybrid PNIPA Nanocomposite Hydrogels; The Mechanical Properties of Inorganic/Organic Co-Crosslinked PDMAEMA Hydrogels; Research on Strain Gauge Protecting-Process to Measurement Data Accuracy of Composite Material Structure; The Mould Flux Viscosity Designing of High Carbon Steel for Thin Slab Continuous Casting
  • The Mould Flux Crystallization Properties Designing of High Carbon Steel for Thin Slab Continuous CastingEffects of Impurities on Silicon Dioxide Dielectric Properties; Unfolding Method of Non-Developable Surface for Sheet-Metal Design; The Clinical Application and Evaluation of Artificial Cruciate Ligament Materials for Knee Exercise Injury; Application and Realization of Digitization of Traditional Metallographic Microscope; Characteristics of Electron Structure and 4f Orbital of Rare Earths and Their Reinforcement of Wastewater Degradation
  • Applied Technology in Using HPLC for Determining Aflatoxin Contents in PeanutsChapter 2: Applied Mechanics, Mechanical Engineering, Electrical and Electronic Engineering; Simulation on the Behavior of Individual Vehicles with Influence Evaluation of Flow Rate and Speed Limits on Freeway; Effect of Jet Hole Size on Drag Reduction Performance of Bionic Jet Surface; Optimization of Horizontal Plate Fin Heat Sink in Natural Convection for Electronics Cooling by Simulated Annealing Algorithm; Error Analysis of a Non-Contact Parallel Plane Sensor Based on Monte Carlo Method
  • The Leakage Causes and Improving Measures of CB Series of Gear Oil Pump Based on Mechanical MechanicsDesign and Implementation of AES Key Generator Based on FPGA; Study on Double Long-Primary Short-Secondary Linear Induction Motor for Magnetic Elevator; Experimental Hydro- and Aerodynamics Research on Arrow; Analysis for Nonlinear Aeroelasticity on Structure and its Current Progress; Simulation on Magnetorheological Suspension Structure of Automotive; The Formation of Temperature Controller by PSoC; Research on the Work Space Optimization of the Six Bar Parallel Machine Tool
Control code
893685591
Dimensions
unknown
Extent
1 online resource (433 pages)
Form of item
online
Isbn
9783038266341
Media category
computer
Media MARC source
rdamedia
Media type code
  • c
Other physical details
illustrations
Specific material designation
remote
System control number
(OCoLC)893685591

Library Locations

    • Thomas Jefferson LibraryBorrow it
      1 University Blvd, St. Louis, MO, 63121, US
      38.710138 -90.311107
Processing Feedback ...