Borrow it
Coverart for item
The Resource Advanced research on mechanics, manufacturing engineering and applied technology II : selected, peer reviewed papers from the 2nd International Conference on Applied Mechanics and Manufacturing System (AMMS 2014), April 26-27, 2014, Zhengzhou, China, edited by Helen Zhang, David Jin and X.J. Zhao

Advanced research on mechanics, manufacturing engineering and applied technology II : selected, peer reviewed papers from the 2nd International Conference on Applied Mechanics and Manufacturing System (AMMS 2014), April 26-27, 2014, Zhengzhou, China, edited by Helen Zhang, David Jin and X.J. Zhao

Creator
Editor
Contributor
Summary
Collection of selected, peer reviewed papers from the 2014 2nd International Conference on Applied Mechanics and Manufacturing System (AMMS2014), April 26-27, 2014, Zhengzhou, China. The 125 papers are grouped as follows: Chapter 1: Materials Science and Processing, Chapter 2: Research and Design in Mechanical Engineering, Chapter 3: Construction Technologies and Materials, Chapter 4: Environmental Engineering, Chapter 5: Oil and Mining Engineering and Manufacturing, Chapter 6: Biomechanics, Biomaterials and Biomedicine, Chapter 7: Robotics, Control and Automation, Chapter 8: Applied Informati
Language
eng
Work
Publication
Extent
1 online resource
Contents
  • Advanced Research on Mechanics, Manufacturing Engineering and Applied Technology II; Preface and Committee; Table of Contents; Chapter 1: Materials Science and Processing; The Luminescence Mechanism and the Structure Defects of ZnO Thin Films; Synthesis of Porous Spheres of TiO2 Nanoparticles and its Photocatalysis Behavior for 1-Naphthylamine-4-Azobenzene-4'-Sulfonic Acid; Effects of Substrate Preheating on Microstructure and Interface Characterization of Al2O3-13% TiO2 Ceramic Coating Fabricated by Laser Cladding
  • Preparation and Characterization of Plasma-Sprayed and Laser-Remelted Ni60/Ni-WC CoatingsPreparation and Properties of Ag Nanofilms for Organic Solar Cells; Effects of Substrate Temperature on Structure and Optical Property of Cu2O:N Thin Film Deposited by Reactive Pulse Magnetron Sputtering; Research on Chemical Materials with Characteristic on Chemical Looping Combustion of Co-Doped Fe2O3 Oxygen Carrier with CO; Research of Hydrogen Atom Penetration during the Phosphorization Process of High-Strength Steel
  • The Constitutive Model of Solid Ice and Snow with Material Properties Based on the Microscopic Mechanical DeformationExperimental Analysis on Fracture Characteristics and Material Properties of Compacted Ice and Snow; The Test of Aircraft Material with Performance Parameters; Study on Composite Materials Used in the Tennis Racket; The Way of Obtain C4H6O+ Macro Ion by C7H12O+ Excited State; Study on the Preparation of WO3/TiO2 Composite Photocatalyst and its Photocatalytic Activity
  • Research on Refractory Material with Influence of Polyethylene Glycol (PEG) 6000 on the Properties of Lubricant for Slide PlateAnalysis of Micro Inclusions in Q195 Steel; The Research on Three-Dimensional Theoretical Model of Residual Stress on Cutting Surface; Chapter 2: Research and Design in Mechanical Engineering; Study of Lateral Tuyere Layout Impact on the Inner Velocity and Temperature Field of Dry Slag Discharge Machine; Research on the Transmission Characteristics and Mechanical Mechanics of Dual Meshing Points in Involute-Circular Arc Tooth Gear
  • Simulation and Analysis about Different Pressure Angle in Involute Gears Based on Neural NetworkResearch on Involute Gear Undercutting with Mechanical Mechanics Based on Neural Network; The Localization of the Wind Turbine Passive Spindle Brake Based on Mechanical Mechanics; A 3D Computation of Fluid-Structure Interaction in a Cyclone Separator; Performance Analysis of Two Stage Compression Cycle with an Internal Heat Exchanger; The Research on Characteristics of a New Type of Marine Gas Turbine Exhaust Ejector Device; The Design of DC/DC Converter for Battery System in Electric Vehicle
Isbn
9783038264767
Instance
Label
Advanced research on mechanics, manufacturing engineering and applied technology II : selected, peer reviewed papers from the 2nd International Conference on Applied Mechanics and Manufacturing System (AMMS 2014), April 26-27, 2014, Zhengzhou, China
Title
Advanced research on mechanics, manufacturing engineering and applied technology II
Title remainder
selected, peer reviewed papers from the 2nd International Conference on Applied Mechanics and Manufacturing System (AMMS 2014), April 26-27, 2014, Zhengzhou, China
Statement of responsibility
edited by Helen Zhang, David Jin and X.J. Zhao
Creator
Contributor
Editor
Subject
Genre
Language
eng
Summary
Collection of selected, peer reviewed papers from the 2014 2nd International Conference on Applied Mechanics and Manufacturing System (AMMS2014), April 26-27, 2014, Zhengzhou, China. The 125 papers are grouped as follows: Chapter 1: Materials Science and Processing, Chapter 2: Research and Design in Mechanical Engineering, Chapter 3: Construction Technologies and Materials, Chapter 4: Environmental Engineering, Chapter 5: Oil and Mining Engineering and Manufacturing, Chapter 6: Biomechanics, Biomaterials and Biomedicine, Chapter 7: Robotics, Control and Automation, Chapter 8: Applied Informati
Member of
Cataloging source
N$T
Dewey number
621
Index
no index present
LC call number
TJ159.5
Literary form
non fiction
http://bibfra.me/vocab/lite/meetingDate
2014
http://bibfra.me/vocab/lite/meetingName
International Conference on Applied Mechanics and Manufacturing System
Nature of contents
dictionaries
http://library.link/vocab/relatedWorkOrContributorName
  • Zhang, Helen
  • Jin, David
  • Zhao, X. J.
Series statement
Applied mechanics and materials
Series volume
volume 540
http://library.link/vocab/subjectName
  • Mechanical engineering
  • Production engineering
  • TECHNOLOGY & ENGINEERING
  • Mechanical engineering
  • Production engineering
Label
Advanced research on mechanics, manufacturing engineering and applied technology II : selected, peer reviewed papers from the 2nd International Conference on Applied Mechanics and Manufacturing System (AMMS 2014), April 26-27, 2014, Zhengzhou, China, edited by Helen Zhang, David Jin and X.J. Zhao
Instantiates
Publication
Copyright
Antecedent source
unknown
Carrier category
online resource
Carrier category code
  • cr
Carrier MARC source
rdacarrier
Color
multicolored
Content category
text
Content type code
  • txt
Content type MARC source
rdacontent
Contents
  • Advanced Research on Mechanics, Manufacturing Engineering and Applied Technology II; Preface and Committee; Table of Contents; Chapter 1: Materials Science and Processing; The Luminescence Mechanism and the Structure Defects of ZnO Thin Films; Synthesis of Porous Spheres of TiO2 Nanoparticles and its Photocatalysis Behavior for 1-Naphthylamine-4-Azobenzene-4'-Sulfonic Acid; Effects of Substrate Preheating on Microstructure and Interface Characterization of Al2O3-13% TiO2 Ceramic Coating Fabricated by Laser Cladding
  • Preparation and Characterization of Plasma-Sprayed and Laser-Remelted Ni60/Ni-WC CoatingsPreparation and Properties of Ag Nanofilms for Organic Solar Cells; Effects of Substrate Temperature on Structure and Optical Property of Cu2O:N Thin Film Deposited by Reactive Pulse Magnetron Sputtering; Research on Chemical Materials with Characteristic on Chemical Looping Combustion of Co-Doped Fe2O3 Oxygen Carrier with CO; Research of Hydrogen Atom Penetration during the Phosphorization Process of High-Strength Steel
  • The Constitutive Model of Solid Ice and Snow with Material Properties Based on the Microscopic Mechanical DeformationExperimental Analysis on Fracture Characteristics and Material Properties of Compacted Ice and Snow; The Test of Aircraft Material with Performance Parameters; Study on Composite Materials Used in the Tennis Racket; The Way of Obtain C4H6O+ Macro Ion by C7H12O+ Excited State; Study on the Preparation of WO3/TiO2 Composite Photocatalyst and its Photocatalytic Activity
  • Research on Refractory Material with Influence of Polyethylene Glycol (PEG) 6000 on the Properties of Lubricant for Slide PlateAnalysis of Micro Inclusions in Q195 Steel; The Research on Three-Dimensional Theoretical Model of Residual Stress on Cutting Surface; Chapter 2: Research and Design in Mechanical Engineering; Study of Lateral Tuyere Layout Impact on the Inner Velocity and Temperature Field of Dry Slag Discharge Machine; Research on the Transmission Characteristics and Mechanical Mechanics of Dual Meshing Points in Involute-Circular Arc Tooth Gear
  • Simulation and Analysis about Different Pressure Angle in Involute Gears Based on Neural NetworkResearch on Involute Gear Undercutting with Mechanical Mechanics Based on Neural Network; The Localization of the Wind Turbine Passive Spindle Brake Based on Mechanical Mechanics; A 3D Computation of Fluid-Structure Interaction in a Cyclone Separator; Performance Analysis of Two Stage Compression Cycle with an Internal Heat Exchanger; The Research on Characteristics of a New Type of Marine Gas Turbine Exhaust Ejector Device; The Design of DC/DC Converter for Battery System in Electric Vehicle
Control code
881732878
Dimensions
unknown
Extent
1 online resource
File format
unknown
Form of item
online
Isbn
9783038264767
Level of compression
unknown
Media category
computer
Media MARC source
rdamedia
Media type code
  • c
Quality assurance targets
not applicable
Reformatting quality
unknown
Sound
unknown sound
Specific material designation
remote
System control number
(OCoLC)881732878
Label
Advanced research on mechanics, manufacturing engineering and applied technology II : selected, peer reviewed papers from the 2nd International Conference on Applied Mechanics and Manufacturing System (AMMS 2014), April 26-27, 2014, Zhengzhou, China, edited by Helen Zhang, David Jin and X.J. Zhao
Publication
Copyright
Antecedent source
unknown
Carrier category
online resource
Carrier category code
  • cr
Carrier MARC source
rdacarrier
Color
multicolored
Content category
text
Content type code
  • txt
Content type MARC source
rdacontent
Contents
  • Advanced Research on Mechanics, Manufacturing Engineering and Applied Technology II; Preface and Committee; Table of Contents; Chapter 1: Materials Science and Processing; The Luminescence Mechanism and the Structure Defects of ZnO Thin Films; Synthesis of Porous Spheres of TiO2 Nanoparticles and its Photocatalysis Behavior for 1-Naphthylamine-4-Azobenzene-4'-Sulfonic Acid; Effects of Substrate Preheating on Microstructure and Interface Characterization of Al2O3-13% TiO2 Ceramic Coating Fabricated by Laser Cladding
  • Preparation and Characterization of Plasma-Sprayed and Laser-Remelted Ni60/Ni-WC CoatingsPreparation and Properties of Ag Nanofilms for Organic Solar Cells; Effects of Substrate Temperature on Structure and Optical Property of Cu2O:N Thin Film Deposited by Reactive Pulse Magnetron Sputtering; Research on Chemical Materials with Characteristic on Chemical Looping Combustion of Co-Doped Fe2O3 Oxygen Carrier with CO; Research of Hydrogen Atom Penetration during the Phosphorization Process of High-Strength Steel
  • The Constitutive Model of Solid Ice and Snow with Material Properties Based on the Microscopic Mechanical DeformationExperimental Analysis on Fracture Characteristics and Material Properties of Compacted Ice and Snow; The Test of Aircraft Material with Performance Parameters; Study on Composite Materials Used in the Tennis Racket; The Way of Obtain C4H6O+ Macro Ion by C7H12O+ Excited State; Study on the Preparation of WO3/TiO2 Composite Photocatalyst and its Photocatalytic Activity
  • Research on Refractory Material with Influence of Polyethylene Glycol (PEG) 6000 on the Properties of Lubricant for Slide PlateAnalysis of Micro Inclusions in Q195 Steel; The Research on Three-Dimensional Theoretical Model of Residual Stress on Cutting Surface; Chapter 2: Research and Design in Mechanical Engineering; Study of Lateral Tuyere Layout Impact on the Inner Velocity and Temperature Field of Dry Slag Discharge Machine; Research on the Transmission Characteristics and Mechanical Mechanics of Dual Meshing Points in Involute-Circular Arc Tooth Gear
  • Simulation and Analysis about Different Pressure Angle in Involute Gears Based on Neural NetworkResearch on Involute Gear Undercutting with Mechanical Mechanics Based on Neural Network; The Localization of the Wind Turbine Passive Spindle Brake Based on Mechanical Mechanics; A 3D Computation of Fluid-Structure Interaction in a Cyclone Separator; Performance Analysis of Two Stage Compression Cycle with an Internal Heat Exchanger; The Research on Characteristics of a New Type of Marine Gas Turbine Exhaust Ejector Device; The Design of DC/DC Converter for Battery System in Electric Vehicle
Control code
881732878
Dimensions
unknown
Extent
1 online resource
File format
unknown
Form of item
online
Isbn
9783038264767
Level of compression
unknown
Media category
computer
Media MARC source
rdamedia
Media type code
  • c
Quality assurance targets
not applicable
Reformatting quality
unknown
Sound
unknown sound
Specific material designation
remote
System control number
(OCoLC)881732878

Subject

Genre

Member of

Library Locations

    • Thomas Jefferson LibraryBorrow it
      1 University Blvd, St. Louis, MO, 63121, US
      38.710138 -90.311107

Library Links

Structured data from the Bibframe namespace is licensed under the Creative Commons Attribution 4.0 International License by University of Missouri-St. Louis Libraries. Additional terms may apply to data associated with third party namespaces.
Processing Feedback ...