The Resource Trends in automotive research : selected, peer reviewed papers from the Regional Conference on Automotive Research (ReCAR 2011), December 14-15, 2011, Kuala Lumpur, Malaysia, edited by Shahrum Abdullah [and others]
Trends in automotive research : selected, peer reviewed papers from the Regional Conference on Automotive Research (ReCAR 2011), December 14-15, 2011, Kuala Lumpur, Malaysia, edited by Shahrum Abdullah [and others]
Resource Information
The item Trends in automotive research : selected, peer reviewed papers from the Regional Conference on Automotive Research (ReCAR 2011), December 14-15, 2011, Kuala Lumpur, Malaysia, edited by Shahrum Abdullah [and others] represents a specific, individual, material embodiment of a distinct intellectual or artistic creation found in University of Missouri-St. Louis Libraries.This item is available to borrow from 1 library branch.
Resource Information
The item Trends in automotive research : selected, peer reviewed papers from the Regional Conference on Automotive Research (ReCAR 2011), December 14-15, 2011, Kuala Lumpur, Malaysia, edited by Shahrum Abdullah [and others] represents a specific, individual, material embodiment of a distinct intellectual or artistic creation found in University of Missouri-St. Louis Libraries.
This item is available to borrow from 1 library branch.
- Summary
- This special issue of Trends in Automotive Research contains papers contributed to the Regional Conference on Automotive Research (ReCAR), held on the 14 and 15th December, 2011, in Kuala Lumpur, Malaysia. The conference was organised by the Centre for Automotive Research (CAR), Faculty of Engineering and the Built Environment, Universiti Kebangsaan Malaysia. Abdullah (U. Kebangsaan, Malaysia) compiles 66 papers from the Regional Conference on Automotive Research (ReCAR 2011), held in December 2011 in Kuala Lumpur, Malaysia. The conference focused on the theme "Inspiring Ideas and Nurturing Innovation in Automotive Research," and engineering professionals, academics, and researchers from southeast Asia, Asia, Iran, Sudan, Canada, Germany, and Australia present new developments, research results, and future perspectives on automotive engineering and related issues. Coverage encompasses materials characterization; computational and experimental mechanics; advanced manufacturing in automotive industries; signal processing and automotive electronics; mathematical modeling and optimization; noise, vibration, and harshness; fuel and combustion; vehicle dynamics and mechatronics; automotive design, comfort, and ergonomics; green technology, safety, comfort, and ergonomics; and other topics
- Language
- eng
- Extent
- 1 online resource (1 volume)
- Contents
-
- Trends in Automotive Research; Preface, Acknowledgements and Committee; Table of Contents; Hydrogen Blended with Gasoline, Diesel, Natural Gas (NGV) as an Alternative Fuel for ICE in Malaysia; Effect of Retrogression Medium to the Mechanical Properties of Aluminum Alloy 7075; Clean Automotive Technology: Hydraulic Hybrid Vehicles (HHVs); Prediction of Fatigue Crack Propagation of Rail Material Using 2D Finite Element Modeling; Whole Body Vibrations Exposure to Malaysian Driver Using Novel IKaz Method
- Fatigue Life Assessment of Aluminium Alloy 6061 Specimen Using Signal Analysis Approach for Automotive Components Effect of Intake Manifold Angle of Port-Fuel Injection Retrofit-Kit to the Performances of an S.I. Engine; New In-Wheel Electric Motor Design for Small Electric Vehicle Using Opera2D; Experimental and Numerical Analysis of Lift and Drag Force of Sedan Car Spoiler; Power Analysis of Light Electric Vehicles Using Fundamental Calculations; Homogenous Charge Compression Ignition (HCCI) Technique: A Review for Application in Two-Stroke Gasoline Engines
- Effects of Pad Surface Topography on Disc Brake Squeal Automotive Noise Insulation Composite Panel Using Natural Fibres with Different Perforation Areas; Structural Modification of Disc Brake Judder Using Finite Element Analysis; Design and Development of Simple Control System for Small Hybrid Electric Vehicle; Corrosion Effect on Car Welded Jointed in Terms of Sea Environment Effect; Experimental and Analytical Durability Assessment of SAE 1045 Steel under Service Loadings; Microstructural Characterization of ZrO2 Layer Coating on Martensitic Stainless Steel
- Accurate Prediction of Springback in Forming of BIW Parts New Concept for Reducing Wire-Harness and Implementing Advanced Facilities for Non-Luxury Vehicles via Application of POF; MFI Zeolite Membrane from Rice Husk for Biofuels Production; Verification of 14DOF Full Vehicle Model Based on Steering Wheel Input; Mathematical Model of Eco-Driving for Energy Optimization for Electric Vehicle; Comparing the Effects of Hydrogen Addition on Performance and Exhaust Emission in a Spark Ignition Fueled with Gasoline and CNG
- Development of 2D Image Capture Method Software for Recognizing Drivers' Postural Angles Impact Response of Thin-Walled Tubes: A Prospective Review; Characterisation of the Sound and Vibration Signal of Impact Testing on Automotive Component Materials; A Study on Validation of Fatigue Damage Clustering Analysis Technique Based on Clustering Validation Index; Experimental Study of an Internal Heat Exchanger Influence on R134a Automobile Air Conditioning System; Underhood Fluid Flow and Thermal Analysis for Passenger Vehicle
- Isbn
- 9783038137405
- Label
- Trends in automotive research : selected, peer reviewed papers from the Regional Conference on Automotive Research (ReCAR 2011), December 14-15, 2011, Kuala Lumpur, Malaysia
- Title
- Trends in automotive research
- Title remainder
- selected, peer reviewed papers from the Regional Conference on Automotive Research (ReCAR 2011), December 14-15, 2011, Kuala Lumpur, Malaysia
- Statement of responsibility
- edited by Shahrum Abdullah [and others]
- Title variation
-
- Regional Conference on Automotive Research
- ReCAR 2011
- Subject
-
- Automobile industry and trade -- Research
- Automobile industry and trade -- Research -- Congresses
- Automobile industry and trade -- Technological innovations
- Automobile industry and trade -- Technological innovations -- Congresses
- Conference papers and proceedings
- Conference papers and proceedings
- Electronic books
- Electronic books
- Motor vehicles -- Design and construction | Technological innovations -- Congresses
- Motor vehicles -- Research
- Motor vehicles -- Research -- Congresses
- Motor vehicles -- Technological innovations
- Motor vehicles -- Technological innovations -- Congresses
- TRANSPORTATION -- Automotive | Customizing
- Language
- eng
- Summary
- This special issue of Trends in Automotive Research contains papers contributed to the Regional Conference on Automotive Research (ReCAR), held on the 14 and 15th December, 2011, in Kuala Lumpur, Malaysia. The conference was organised by the Centre for Automotive Research (CAR), Faculty of Engineering and the Built Environment, Universiti Kebangsaan Malaysia. Abdullah (U. Kebangsaan, Malaysia) compiles 66 papers from the Regional Conference on Automotive Research (ReCAR 2011), held in December 2011 in Kuala Lumpur, Malaysia. The conference focused on the theme "Inspiring Ideas and Nurturing Innovation in Automotive Research," and engineering professionals, academics, and researchers from southeast Asia, Asia, Iran, Sudan, Canada, Germany, and Australia present new developments, research results, and future perspectives on automotive engineering and related issues. Coverage encompasses materials characterization; computational and experimental mechanics; advanced manufacturing in automotive industries; signal processing and automotive electronics; mathematical modeling and optimization; noise, vibration, and harshness; fuel and combustion; vehicle dynamics and mechatronics; automotive design, comfort, and ergonomics; green technology, safety, comfort, and ergonomics; and other topics
- Cataloging source
- MUU
- Dewey number
- 629.2/31
- Illustrations
- illustrations
- Index
- index present
- LC call number
- TL6
- LC item number
- .R44 2012
- Literary form
- non fiction
- http://bibfra.me/vocab/lite/meetingDate
- 2011
- http://bibfra.me/vocab/lite/meetingName
- Regional Conference on Automotive Research
- Nature of contents
-
- dictionaries
- bibliography
- http://library.link/vocab/relatedWorkOrContributorDate
- 1971-
- http://library.link/vocab/relatedWorkOrContributorName
- Abdullah, Shahrum
- Series statement
- Applied mechanics and materials
- Series volume
- v. 165
- http://library.link/vocab/subjectName
-
- Automobile industry and trade
- Automobile industry and trade
- Motor vehicles
- Motor vehicles
- Motor vehicles
- TRANSPORTATION
- Automobile industry and trade
- Automobile industry and trade
- Motor vehicles
- Motor vehicles
- Label
- Trends in automotive research : selected, peer reviewed papers from the Regional Conference on Automotive Research (ReCAR 2011), December 14-15, 2011, Kuala Lumpur, Malaysia, edited by Shahrum Abdullah [and others]
- Antecedent source
- unknown
- Bibliography note
- Includes bibliographical references and index
- Carrier category
- online resource
- Carrier category code
-
- cr
- Carrier MARC source
- rdacarrier
- Color
- multicolored
- Content category
- text
- Content type code
-
- txt
- Content type MARC source
- rdacontent
- Contents
-
- Trends in Automotive Research; Preface, Acknowledgements and Committee; Table of Contents; Hydrogen Blended with Gasoline, Diesel, Natural Gas (NGV) as an Alternative Fuel for ICE in Malaysia; Effect of Retrogression Medium to the Mechanical Properties of Aluminum Alloy 7075; Clean Automotive Technology: Hydraulic Hybrid Vehicles (HHVs); Prediction of Fatigue Crack Propagation of Rail Material Using 2D Finite Element Modeling; Whole Body Vibrations Exposure to Malaysian Driver Using Novel IKaz Method
- Fatigue Life Assessment of Aluminium Alloy 6061 Specimen Using Signal Analysis Approach for Automotive Components Effect of Intake Manifold Angle of Port-Fuel Injection Retrofit-Kit to the Performances of an S.I. Engine; New In-Wheel Electric Motor Design for Small Electric Vehicle Using Opera2D; Experimental and Numerical Analysis of Lift and Drag Force of Sedan Car Spoiler; Power Analysis of Light Electric Vehicles Using Fundamental Calculations; Homogenous Charge Compression Ignition (HCCI) Technique: A Review for Application in Two-Stroke Gasoline Engines
- Effects of Pad Surface Topography on Disc Brake Squeal Automotive Noise Insulation Composite Panel Using Natural Fibres with Different Perforation Areas; Structural Modification of Disc Brake Judder Using Finite Element Analysis; Design and Development of Simple Control System for Small Hybrid Electric Vehicle; Corrosion Effect on Car Welded Jointed in Terms of Sea Environment Effect; Experimental and Analytical Durability Assessment of SAE 1045 Steel under Service Loadings; Microstructural Characterization of ZrO2 Layer Coating on Martensitic Stainless Steel
- Accurate Prediction of Springback in Forming of BIW Parts New Concept for Reducing Wire-Harness and Implementing Advanced Facilities for Non-Luxury Vehicles via Application of POF; MFI Zeolite Membrane from Rice Husk for Biofuels Production; Verification of 14DOF Full Vehicle Model Based on Steering Wheel Input; Mathematical Model of Eco-Driving for Energy Optimization for Electric Vehicle; Comparing the Effects of Hydrogen Addition on Performance and Exhaust Emission in a Spark Ignition Fueled with Gasoline and CNG
- Development of 2D Image Capture Method Software for Recognizing Drivers' Postural Angles Impact Response of Thin-Walled Tubes: A Prospective Review; Characterisation of the Sound and Vibration Signal of Impact Testing on Automotive Component Materials; A Study on Validation of Fatigue Damage Clustering Analysis Technique Based on Clustering Validation Index; Experimental Study of an Internal Heat Exchanger Influence on R134a Automobile Air Conditioning System; Underhood Fluid Flow and Thermal Analysis for Passenger Vehicle
- Control code
- 813390194
- Dimensions
- unknown
- Extent
- 1 online resource (1 volume)
- File format
- unknown
- Form of item
- online
- Isbn
- 9783038137405
- Level of compression
- unknown
- Media category
- computer
- Media MARC source
- rdamedia
- Media type code
-
- c
- Other physical details
- illustrations
- Quality assurance targets
- not applicable
- Reformatting quality
- unknown
- Sound
- unknown sound
- Specific material designation
- remote
- System control number
- (OCoLC)813390194
- Label
- Trends in automotive research : selected, peer reviewed papers from the Regional Conference on Automotive Research (ReCAR 2011), December 14-15, 2011, Kuala Lumpur, Malaysia, edited by Shahrum Abdullah [and others]
- Antecedent source
- unknown
- Bibliography note
- Includes bibliographical references and index
- Carrier category
- online resource
- Carrier category code
-
- cr
- Carrier MARC source
- rdacarrier
- Color
- multicolored
- Content category
- text
- Content type code
-
- txt
- Content type MARC source
- rdacontent
- Contents
-
- Trends in Automotive Research; Preface, Acknowledgements and Committee; Table of Contents; Hydrogen Blended with Gasoline, Diesel, Natural Gas (NGV) as an Alternative Fuel for ICE in Malaysia; Effect of Retrogression Medium to the Mechanical Properties of Aluminum Alloy 7075; Clean Automotive Technology: Hydraulic Hybrid Vehicles (HHVs); Prediction of Fatigue Crack Propagation of Rail Material Using 2D Finite Element Modeling; Whole Body Vibrations Exposure to Malaysian Driver Using Novel IKaz Method
- Fatigue Life Assessment of Aluminium Alloy 6061 Specimen Using Signal Analysis Approach for Automotive Components Effect of Intake Manifold Angle of Port-Fuel Injection Retrofit-Kit to the Performances of an S.I. Engine; New In-Wheel Electric Motor Design for Small Electric Vehicle Using Opera2D; Experimental and Numerical Analysis of Lift and Drag Force of Sedan Car Spoiler; Power Analysis of Light Electric Vehicles Using Fundamental Calculations; Homogenous Charge Compression Ignition (HCCI) Technique: A Review for Application in Two-Stroke Gasoline Engines
- Effects of Pad Surface Topography on Disc Brake Squeal Automotive Noise Insulation Composite Panel Using Natural Fibres with Different Perforation Areas; Structural Modification of Disc Brake Judder Using Finite Element Analysis; Design and Development of Simple Control System for Small Hybrid Electric Vehicle; Corrosion Effect on Car Welded Jointed in Terms of Sea Environment Effect; Experimental and Analytical Durability Assessment of SAE 1045 Steel under Service Loadings; Microstructural Characterization of ZrO2 Layer Coating on Martensitic Stainless Steel
- Accurate Prediction of Springback in Forming of BIW Parts New Concept for Reducing Wire-Harness and Implementing Advanced Facilities for Non-Luxury Vehicles via Application of POF; MFI Zeolite Membrane from Rice Husk for Biofuels Production; Verification of 14DOF Full Vehicle Model Based on Steering Wheel Input; Mathematical Model of Eco-Driving for Energy Optimization for Electric Vehicle; Comparing the Effects of Hydrogen Addition on Performance and Exhaust Emission in a Spark Ignition Fueled with Gasoline and CNG
- Development of 2D Image Capture Method Software for Recognizing Drivers' Postural Angles Impact Response of Thin-Walled Tubes: A Prospective Review; Characterisation of the Sound and Vibration Signal of Impact Testing on Automotive Component Materials; A Study on Validation of Fatigue Damage Clustering Analysis Technique Based on Clustering Validation Index; Experimental Study of an Internal Heat Exchanger Influence on R134a Automobile Air Conditioning System; Underhood Fluid Flow and Thermal Analysis for Passenger Vehicle
- Control code
- 813390194
- Dimensions
- unknown
- Extent
- 1 online resource (1 volume)
- File format
- unknown
- Form of item
- online
- Isbn
- 9783038137405
- Level of compression
- unknown
- Media category
- computer
- Media MARC source
- rdamedia
- Media type code
-
- c
- Other physical details
- illustrations
- Quality assurance targets
- not applicable
- Reformatting quality
- unknown
- Sound
- unknown sound
- Specific material designation
- remote
- System control number
- (OCoLC)813390194
Subject
- Automobile industry and trade -- Research
- Automobile industry and trade -- Research -- Congresses
- Automobile industry and trade -- Technological innovations
- Automobile industry and trade -- Technological innovations -- Congresses
- Conference papers and proceedings
- Conference papers and proceedings
- Electronic books
- Electronic books
- Motor vehicles -- Design and construction | Technological innovations -- Congresses
- Motor vehicles -- Research
- Motor vehicles -- Research -- Congresses
- Motor vehicles -- Technological innovations
- Motor vehicles -- Technological innovations -- Congresses
- TRANSPORTATION -- Automotive | Customizing
Genre
Member of
Library Links
Embed
Settings
Select options that apply then copy and paste the RDF/HTML data fragment to include in your application
Embed this data in a secure (HTTPS) page:
Layout options:
Include data citation:
<div class="citation" vocab="http://schema.org/"><i class="fa fa-external-link-square fa-fw"></i> Data from <span resource="http://link.umsl.edu/portal/Trends-in-automotive-research--selected-peer/HZD9KSPHW9I/" typeof="Book http://bibfra.me/vocab/lite/Item"><span property="name http://bibfra.me/vocab/lite/label"><a href="http://link.umsl.edu/portal/Trends-in-automotive-research--selected-peer/HZD9KSPHW9I/">Trends in automotive research : selected, peer reviewed papers from the Regional Conference on Automotive Research (ReCAR 2011), December 14-15, 2011, Kuala Lumpur, Malaysia, edited by Shahrum Abdullah [and others]</a></span> - <span property="potentialAction" typeOf="OrganizeAction"><span property="agent" typeof="LibrarySystem http://library.link/vocab/LibrarySystem" resource="http://link.umsl.edu/"><span property="name http://bibfra.me/vocab/lite/label"><a property="url" href="http://link.umsl.edu/">University of Missouri-St. Louis Libraries</a></span></span></span></span></div>
Note: Adjust the width and height settings defined in the RDF/HTML code fragment to best match your requirements
Preview
Cite Data - Experimental
Data Citation of the Item Trends in automotive research : selected, peer reviewed papers from the Regional Conference on Automotive Research (ReCAR 2011), December 14-15, 2011, Kuala Lumpur, Malaysia, edited by Shahrum Abdullah [and others]
Copy and paste the following RDF/HTML data fragment to cite this resource
<div class="citation" vocab="http://schema.org/"><i class="fa fa-external-link-square fa-fw"></i> Data from <span resource="http://link.umsl.edu/portal/Trends-in-automotive-research--selected-peer/HZD9KSPHW9I/" typeof="Book http://bibfra.me/vocab/lite/Item"><span property="name http://bibfra.me/vocab/lite/label"><a href="http://link.umsl.edu/portal/Trends-in-automotive-research--selected-peer/HZD9KSPHW9I/">Trends in automotive research : selected, peer reviewed papers from the Regional Conference on Automotive Research (ReCAR 2011), December 14-15, 2011, Kuala Lumpur, Malaysia, edited by Shahrum Abdullah [and others]</a></span> - <span property="potentialAction" typeOf="OrganizeAction"><span property="agent" typeof="LibrarySystem http://library.link/vocab/LibrarySystem" resource="http://link.umsl.edu/"><span property="name http://bibfra.me/vocab/lite/label"><a property="url" href="http://link.umsl.edu/">University of Missouri-St. Louis Libraries</a></span></span></span></span></div>
