#
Finite element method
Resource Information
The concept ** Finite element method** represents the subject, aboutness, idea or notion of resources found in **University of Missouri-St. Louis Libraries**.

The Resource
Finite element method
Resource Information

The concept

**Finite element method**represents the subject, aboutness, idea or notion of resources found in**University of Missouri-St. Louis Libraries**.- Label
- Finite element method

- Source
- nasat

## Context

Context of Finite element method#### Subject of

No resources found

No enriched resources found

- [Analysis and development of finite element methods for the study of nonlinear thermomechanical behavior of structural components]
- A 3-D magnetic analysis of a Stirling converter linear alternator under load
- A CFD/CSD interaction methodology for aircraft wings : a dissertation ...
- A Finite element-boundary integral method for cavities in a circular cylinder
- A coupled/upcoupled computational scheme for deformation and fatigue damage analysis of unidirectional metal-matrix composites
- A decentralized linear quadratic control design method for flexible structures : interim report
- A discontinuous Galerkin finite element method for Hamilton-Jacobi equations : ... under contract NAS1-19480
- A discourse on sensitivity analysis for discretely-modeled structures
- A finite element approach for the dynamic analysis of joint-dominated structures
- A finite element procedure for calculating fluid-structure interaction using MSC/NASTRAN
- A finite element-boundary integral formulation for scattering by three-dimensional cavity-backed apertures
- A finite element-boundary integral formulation for scattering by three-dimensional cavity-backed apertures
- A general interface method for aeroelastic analysis of aircraft
- A least-squares finite element method for electromagnetic scattering problems
- A least-squares finite element method for incompressible Navier-Stokes problems
- A life prediction model for laminated composite structural components : final technical report
- A mixed multi-field finite element formulation for thermopiezoelectric composite shells
- A multiscale progressive failure modeling methodology for composites that includes fiber strength stochastics
- A multiscale, nonlinear, modeling framework enabling the design and analysis of composite materials and structures
- A new implementation of the Programming System for Structural Synthesis (PROSSS-2
- A new technique for simulating composite material : final report
- A novel shape parameterization approach
- A package for 3-D unstructured grid generation, finite-element flow solution and flow field visualization
- A posteriori finite element bounds for sensitivity derivatives of partial-differential-equation outputs
- A probabilistic approach to model update
- A review of the analytical simulation of aircraft crash dynamics
- A spline-based parameter estimation technique for static models of elastic structures
- A strategy for integrating a large finite element model using MSC NASTRAN/PATRAN : X-33 lessons learned
- A study of facilities and fixtures for testing of a high speed civil transport wing component
- A study of failure in small pressurized cylindrical shells containing a crack
- A study on strength evaluations of EDNi/EDCu/NARloy-Z bonded joints
- A study on the sensitivity and simultaneous adjustment of a hoop-column antenna surface
- A test for characterizing delamination migration in carbon/epoxy tape laminates
- A thermostructural analysis of a diboride composite leading edge
- A thermostructural analysis of a diboride composite leading edge
- A three dimensional thermodynamically based function for the progressive failure of unidirectional composites
- A three-dimensional finite-element thermal/mechanical analytical technique for high-performance traveling wave tubes
- A user's manual and tutorial for performing COMET structural analyses using an advanced user-friendly interface
- A weak Hamiltonian finite element method for optimal control problems
- ACT payload shroud structural concept analysis and optimization
- ASTROP2 users manual : a program for aeroelastic stability analysis of propfans
- ASTROP2 users manual : a program for aeroelastic stability analysis of propfans
- Acoustic radiation efficiency models of a simple gearbox
- Adaptive finite element methods for continuum damage modeling
- Adaptive shape functions and internal mesh adaptation for modelling progressive failure in adhesively bonded joints
- Advances in fatigue and fracture mechanics analyses for metallic aircraft structures
- Advances in fatigue and fracture mechanics analyses for metallic aircraft structures
- Aircraft structural mass property prediction using conceptual-level structural analysis
- Algebraic turbulence modeling for unstructured and adaptive meshes
- An AWE implementation for electromagnetic analysis
- An analytical method to calculate effective elastic properties of general multifunctional honeycomb cores in sandwich composites
- An assessment on finite-element modeling techniques for thick-solid/thin-shell joints analysis
- An experimental investigation of transverse tension fatigue characterization of IM6/3501-6 composite materials using a three-point bend test : contract NAG1-1773
- An integrated magnetic circuit model and finite element model approach to magnetic bearing design
- Analysis and testing of plates with piezoelectric sensors and actuators
- Analysis for thermo-chemical decomposition of composite structures : final report
- Analysis of new composite architectures : (final report NAG3-1270)
- Analysis of the STS-126 flow control valve structural-acoustic coupling failure
- Analysis of thick sandwich shells with embedded ceramic tiles
- Analysis of waveguide junction discontinuities using finite element method : contract NAS1-19341
- Analysis, approximation, and computation of a coupled solid/fluid temperature control problem
- Analytic and computational perspectives of multi-scale theory for homogeneous, laminated composite, and sandwich beams and plates
- Analytical and experimental investigation of rubbing interaction in labryinth seals for a liquid hydrogen fuel pump
- Anomalous buckling characteristics of laminated metal-matrix composite plates with central square holes
- Application of benchmark examples to assess the single and mixed-mode static delamination propagation capabilities in ANSYSÂ®
- Application of composite mechanics to composites enhanced concrete structures
- Application of finite element method to analyze inflatable waveguide structures
- Application of interface technology in nonlinear analysis of a stitched/RFI composite wing stub box
- Application of model based parameter estimation for fast frequency response calculations of input characteristics of cavity-backed aperture antennas using hybrid FEM/MoM technique
- Applications of parallel computation in micro-mechanics and finite element method : final report ... time period: October 1, 1993 to May 31, 1996
- Buckling and damage resistance of transversely-loaded composite shells
- Buckling testing and analysis of honeycomb sandwich panel arc segments of a full-scale fairing barrel
- Burst testing of a superalloy disk with a dual grain structure
- CARES/LIFE Ceramics Analysis and Reliability Evaluation of Structures Life Prediction Program
- CARES/LIFE Ceramics Analysis and Reliability Evaluation of Structures Life Prediction Program
- COMGEN, a computer program for generating finite element models of composite materials at the micro level
- CSTEM user manual
- Calculations of diffuser flows with an anisotropic K-[epsilon] model
- Calibration of International Space Station (ISS) node 1 vibro-acoustic model
- Calibration of International Space Station (ISS) node 1 vibro-acoustic model, Report 2
- Calibration of a structural finite element model for a representative inflatable space structure utilizing probabilistic methods and surrogate models
- Center for Computational Structures Technology : semi-annual report
- Combined effect of matrix cracking and stress-free edge on delamination
- Comparison of experimental and analytical tooth bending stress of aerospace spiral bevel gears
- Compatibility conditions of structural mechanics
- Compression response of a sandwich fuselage keel panel with and without damage
- Compression response of a sandwich fuselage keel panel with and without damage
- Computation of loads on the McDonnell Douglas advanced bearingless rotor
- Computational aeroservoelastic analysis with an Euler-based unsteady flow solver : NASA-Ames university consortium cooperative agreement no. NCC2-5105, final research summary for the period: 1 November 1994 - 31 January 1997
- Computational simulation of structural fracture in fiber composites
- Computational study of a McDonnell Douglas single-stage-to-orbit vehicle concept for aerodynamic analysis
- Computer simulation of gear tooth manufacturing processes
- Conjugate heat transfer analyses on the manifold for ramjet fuel injectors
- Constitutive modeling for isotropic materials (HOST
- Constitutive modeling of the facesheet to core interface in honeycomb sandwich panels subject to mode I delamination
- Control-volume mixed finite element methods
- Correlation of structural analysis and test results for the McDonnell Douglas stitched/RFI all-composite wing stub box
- Correlation of structural analysis and test results for the McDonnell Douglas stitched/RFI all-composite wing stub box
- Coupled mixed-field laminate theory and finite element for smart piezolectric composite shell structures
- Coupled structural, thermal, phase-change and electromagnetic analysis for superconductors, Volume I
- Crack driving forces in a multilayered coating system for ceramic matrix composite substrates
- Crashworthy evaluation of a 1/5-scale model composite fuselage concept
- DAC-3 pointing stability analysis results for SAGE III and other users of the International Space Station (ISS) Payload Attachment Sites (PAS)
- Data driven model development for the supersonic semispan transport (S4T)
- Deformation analysis of rotary combustion engine housings : final report on NASA grant NAG 3-456
- Delamination growth in composite materials
- Design evaluation using finite element analysis of cooled silicon nitride plates for a turbine blade application
- Design evaluation using finite element analysis of cooled silicon nitride plates for a turbine blade application
- Design, generation and tooth contact analysis (TCA) of asymmetric face gear drive with modified geometry
- Design, optimization and evaluation of integrally stiffened Al 7050 panel with curved stiffeners
- Design, optimization, and evaluation of A1-2139 compression panel with integral T-stiffeners
- Development and application of benchmark examples for mixed-mode I/II quasi-static delamination propagation predictions
- Development and calibration of a system-integrated rotorcraft finite element model for impact scenarios
- Development of a benchmark example for delamination fatigue growth prediction
- Development of a simplified procedure for rocket engine thrust chamber life prediction with creep : final report
- Development of advanced methods of structural and trajectory analysis for transport aircraft : annual report : October 1, 1995 - September 30, 1996
- Development of an experimental space station model for structural dynamics research
- Development of multiobjective optimization techniques for sonic boom minimization : final report on NASA Ames grant no. NCC2-5064, performance period--5/16/94-9/15/96
- Development of software to model AXAF-I image quality : final report
- Direct numerical simulation of incompressible pipe flow using a B-spline spectral method
- Direct numerical simulation of incompressible pipe flow using a b-spline spectral method
- Discontinuously stiffened composite panel under compressive loading
- Distributed finite element analysis using a transputer network : final report
- Documentation for a structural optimization procedure developed using the Engineering Analysis Language (EAL)
- Dynamic analysis of a two member manipulator arm : NAG1-1997, FRS no. 4-42011, final report
- Dynamic finite element predictions for Mars sample return cellular impact test #4
- Dynamic response assessment for the MEMS accelerometer under severe shock loads
- Dynamic shape reconstruction of three-dimensional frame structures using the inverse finite element method
- Earth Observing System (EOS)/Advanced Microwave Sounding Unit-A (AMSU-A), stress analysis report, A1 module : contract no. NAS5-32314
- Effect of crack curvature on stress intensity factors for ASTM standard compact tension specimens
- Effect of rim thickness on gear crack propagation path
- Elastic response of (001)-oriented PWA 1480 single crystal : the influence of secondary orientation
- Elastic-plastic J-integral solutions for surface cracks in tension using an interpolation methodology
- Electromagnetic scattering analysis of arbitrarily shaped material cylinder by FEM-BEM method
- Electromagnetic scattering from realistic targets : final report for NASA NAG 3-1474
- Element load data processor (ELDAP) user's manual
- Enhanced accuracy by post-processing for finite element methods for hyperbolic equations
- Entropy stable wall boundary conditions for the compressible Navier-Stokes equations
- Equivalent linearization analysis of geometrically nonlinear random vibrations using commercial finite element codes
- Evaluation of MARC for the analysis of rotating composite blades
- Evaluation of the Edge Crack Torsion (ECT) test for mode III interlaminar fracture toughness of laminated composites
- Exhibit D modular design attitude control system study : progress report
- Experimental and analytical characterization of the macromechanical response for triaxial braided composite materials
- Experimental verification of a progressive damage model for IM7/5260 laminates subjected to tension-tension fatigue
- Extension of Ko straight-beam displacement theory to deformed shape predictions of slender curved structures
- Extracting damping ratio from dynamic data and numerical solutions
- Fan noise prediction system development : source/radiation field coupling and workstation conversion for the acoustic radiation code
- Fatigue life methodology for bonded composite skin/stringer configurations
- Fatigue life methodology for tapered composite flexbeam laminates
- Fatigue life methodology for tapered composite flexbeam laminates
- Fiber pushout test : a three-dimensional finite element computational simulation
- Final report for SRB combustion dynamics analysis computer program (CDA-1)
- Final report for SRB combustion dynamics analysis computer program (CDA-1), NAG8-627
- Final report on numerical study of magnetic damping during unidirectional solidification (NASA grant #: NCC3-435), duration: October 1, 1995 - September 30, 1997
- Final technical report for aeroelastic analysis of propulsion systems : NASA grant number NAG3-1068 : grant duration, August 16, 1989 to December 9, 1993
- Final technical report for aeroelastic analysis of propulsion systems : NASA grant number NAG3-1068 : grant duration, August 16, 1989 to December 9, 1993
- Final technical report for development and application of viscoplastic models in nonlinear structural analysis : NASA grant number, NCC3-120 : grant duration, December 5, 1998 to December 1, 1994
- Final technical report for the development of computational techniques for the nonlinear analysis of composite structures at high temperature : NASA grant number, NCC3-248, grant duration, January 13, 1992 to March 1, 1995
- Finite and boundary element modeling of the NASA Langley aluminum testbed cylinder (ATC)
- Finite element aircraft simulation of turbulence
- Finite element analysis and test results comparison for the hybrid wing body center section test article
- Finite element analysis of a NASA National Transonic Facility wind tunnel balance
- Finite element analysis of a NASA National Transonic Facility wind tunnel balance
- Finite element elastic-plastic-creep and cyclic life analysis of a cowl lip
- Finite element model for failure study of two-dimensional triaxially braided composite
- Finite element modeling and analysis of Mars entry aeroshell concept
- Finite element simulation of a space shuttle solid rocket booster aft skirt splashdown using an arbitrary Lagrangian-Eulerian approach
- Finite element simulations of two vertical drop tests of F-28 fuselage sections
- Finite element thermo-viscoplastic analysis of aerospace structures
- Finite-element analysis of a Mach-8 flight test article using nonlinear contact elements
- Finite-element analysis of a Mach-8 flight test article using nonlinear contact elements
- Finite-element vibration analysis and modal testing of graphite epoxy tubes and correlation between the data
- Flow/damage surfaces for fiber-reinforced metals having different periodic microstructures
- Flow/damage surfaces for fiber-reinforced metals having different periodic microstructures
- Fluids and combustion facility : fluids integrated rack modal model correlation
- Fourier analysis of finite element preconditioned collocation schemes
- Free vibrations of thin-walled semicircular graphite epoxy composite frames
- Free-edge delamination : laminate width and loading conditions effects
- Free-suspension residual flexibility testing of space station Pathfinder : comparison to fixed-base results
- Full-field reconstruction of structural deformations and loads from measured strain data on a wing test article using the inverse finite element method
- Functionally graded adhesives for composite joints
- Further development of Ko displacement theory for deformed shape predictions of nonuniform aerospace structures
- Guidelines for VCCT-based interlaminar fatigue and progressive failure finite element analysis
- Guidelines for proof test analysis
- Highly accurate beam torsion solutions using the p-Version finite element method
- ICAN/PART, particulate composite analyzer, user's manual and verification studies
- Identification of rotorcraft structural dynamics from flight and wind tunnel data : final report covering the period February 1991 - August 1992, prepared under NASA-Ames agreement no. NAG 2-694 ...
- Impact and penetration of thin aluminum 2024 flat panels at oblique angles of incidence
- Impact testing and simulation of composite airframe structures
- Impact testing of composites for aircraft engine fan cases
- Implementation of J-A methodology elastic-plastic crack instability analysis capability into the WARP-3D code
- Improved finite element modeling of the turbofan engine inlet radiation problem
- Improved subcell model for the prediction of braided composite response
- Incorporation of failure into an orthotropic three-dimensional model with tabulated input suitable for use in composite impact problems
- Influence of finite element software on energy release rates computed using the virtual crack closure technique
- Influence of shear stiffness degradation on crack paths in uni-directional composite laminates
- Integrated Advanced Microwave Sounding Unit A-2 (AMSU-A2), EOS stress analysis report : contract no. NAS5-32314
- Integrated Advanced Microwave Sounding Unit-A (AMSU-A) : METOP stress analysis report (qual level random vibration), A1 module : contract no. NAS 5-32314
- Investigation of difficult component effects on finite element model vibration prediction for the Bell AH-1G helicopter
- Investigation of effects of material architecture on the elastic response of a woven ceramic matrix composite
- Kinetics of cyclic oxidation and cracking and finite element analysis of MA956 and Sapphire/MA956 composite system
- LOOPREF : a fluid code for the simulation of coronal loops : contract NAS5-32350
- Large Civil Tiltrotor (LCTR2) interior noise predictions due to turbulent boundary layer excitation
- Large angle transient dynamics (LATDYN) : demonstration problem manual
- Large-deformation displacement transfer functions for shape predictions of highly flexible slender aerospace structures
- Lattice truss structural response using energy methods
- Layerwise finite elements for smart piezoceramic composite plates in thermal environments
- Layerwise finite elements for smart piezoceramic composite plates in thermal environments
- Local strain redistribution corrections for a simplified inelastic analysis procedure based on an elastic finite-element analysis
- Macro scale independently homogenized subcells for modeling braided composites
- Material characterization and geometric segmentation of a composite structure using microfocus x-ray computed tomography image-based finite element modeling
- Measuring crack length in coarse grain ceramics
- Mechanical testing program for thermal barrier coating development : NASA Lewis Research Center, cooperative agreement NCC3-187, final report
- Mechanical- and thermal-buckling behavior of rectangular plates with different central cutouts
- Meshing of a spiral bevel gearset with 3D finite element analysis
- Metal matrix composites microfracture : computational simulation
- Meteorological Satellites (METSAT) and Earth Observing System (EOS), Advanced Microwave Sounding Unit-A (AMSU-A) : stress analysis report : contract no. NAS 5-32314
- Meteorological Satellites (METSAT) and Earth Observing System (EOS), Advanced Microwave Sounding Unit-A (AMSU-A) : stress analysis report : contract no. NAS 5-32314
- Method for estimating operational loads on aerospace structures using span-wisely distributed surface strains
- Methodology for predicting the onset of widespread fatigue damage in lap-splice joints
- Methodology for predicting the onset of widespread fatigue damage in lap-splice joints
- Methods for assessing honeycomb sandwich panel wrinkling failures
- Microgravity emissions laboratory testing of the light microscopy module control box fan
- Micromechanics analysis of space simulated thermal deformations and stresses in continuous fiber reinforced composites
- Minimum weight design of a generic axisymmetric inlet
- Minimum weight design of a generic axisymmetric inlet
- Modal analysis of UH-60A instrumented rotor blades
- Modal ring method for the scattering of sound
- Modeled and measured dynamics of a composite beam with periodically varying form core
- Modeling and analysis of composite wing sections for improved aeroelastic and vibration characteristics using smart materials
- Modeling and analysis of fluted-core composite structures for aerospace applications
- Modeling of structural-acoustic interaction using coupled FE/BE method and control of interior acoustic pressure using piezoelectric actuators : final report for the period ending August, 1997 under research grant NAG1-1684
- Modeling progressive damage using local displacement discontinuities within the FEAMAC multiscale modeling framework
- Modeling progressive failure of bonded joints using a single joint finite element
- Modification of a macromechanical finite-element based model for impact analysis of triaxially-braided composites
- Multi-criterion preliminary design of a tetrahedral truss platform
- Multidisciplinary approach to aerospike nozzle design
- Multidisciplinary approach to aerospike nozzle design
- Multigrid methods in structural mechanics
- NASA Workshop on Computational Structural Mechanics 1987 : proceedings of a workshop
- NESSUS/NASTRAN interface : final report, NASA contract NAS8-39797, SwRI project 06-7212
- Non-linear dynamic analysis of geared systems, Part II, final report
- Non-linear finite element modeling of THUNDER piezoelectric actuators
- Non-linear finite element modeling of THUNDER piezoelectric actuators
- Nonlinear analysis of the space shuttle superlightweight external fuel tank
- Nonlinear analysis of thin fracture specimens using solid, isoparametric finite elements
- Nonlinear response and residual strength of damaged stiffened shells subjected to combined loads
- Nonlinear response and residual strength of damaged stiffened shells subjected to combined loads
- Numerical implementation of a multiple-ISV thermodynamically-based work potential theory for modeling progressive damage and failure in fiber-reinforced laminates
- Numerical modeling of HgCdTe solidification : effects of phase diagram, double-diffusion convection and microgravity level
- Numerical modeling of solidification in space with MEPHISTO-4 (Part 2)
- Numerical simulation of delamination growth in composite materials
- On hybrid and mixed finite element methods
- On-orbit application of H-infinity to the middeck active controls experiment : overview of results
- On-orbit application of H-infinity to the middeck active controls experiment : overview of results
- Parallel Newton-Krylov-Schwarz algorithms for the transonic full potential equation : NASA contract no. NAS1-19480
- Parallel computation of the Jacobian matrix for nonlinear equation solvers using MATLAB
- Parallel processors and nonlinear structural dynamics algorithms and software
- Parallelization of finite element analysis codes using heterogeneous distributed computing : NASA grant--NAG3-1440, final report, start date--January 15, 1993, end date--March 31, 1996
- Parametric structural model for a Mars entry concept
- Permanent magnetic bearing for spacecraft applications
- Piezoelectric vibration damping study for rotating composite fan blades
- Postbuckling delamination of a stiffened composite panel using finite element methods
- Preconditioned mixed spectral element methods for elasticity and stokes problems
- Predictions of thermal buckling strengths of hypersonic aircraft sandwich panels using minimum potential energy and finite element methods
- Preliminary in-flight loads analysis of in-line launch vehicles using the VLOADS 1.4 program
- Preliminary in-flight loads analysis of in-line launch vehicles using the VLOADS 1.4 program
- Preliminary investigation of stability of a fin-stiffened slender strut
- Probabilistic Structural Analysis Methods (PSAM) for select space propulsion system components
- Probabilistic assessment of National Wind Tunnel
- Probabilistic assessment of National Wind Tunnel
- Probabilistic methods for structural reliability and risk
- Procedure for implementation of temperature-dependent mechanical property capability in the Engineering Analysis Language (EAL) system
- Progressive Damage Analysis of Laminated Composite (PDALC)--a computational model implemented in the NASA COMET finite element code
- Progressive damage analysis of laminated composite (PDALC) : (a computational model implemented in the NASA COMET finite element code) version 2.0
- Progressive failure of a unidirectional fiber-reinforced composite using the method of cells : discretization objective computational results
- Progressive fracture of fiber composite build-up structures
- Progressive fracture of fiber composite build-up structures
- Progressive fracture of fiber composite thin shell structures under internal pressure and axial loads
- Progressive fracture of fiber composite thin shell structures under internal pressure and axial loads
- Quantitative examination of corrosion damage by means of thermal response measurements
- Quasi-static viscoelastic finite element model of an aircraft tire
- Recent advances in hybrid/mixed finite elements
- Recent advances in the analysis of spiral bevel gears
- Recent advances in the analysis of spiral bevel gears
- Reduced uncertainties in the flutter analysis of the aerostructures test wing
- Residual stresses in thermal barrier coatings for a Cu-8Cr-4Nb substrate system
- Residual stresses in thermal barrier coatings for a Cu-8Cr-4Nb substrate system
- Residual stresses induced due to curing of the bulk matrix in a simplified three-dimensional (3D) woven repeating unit cell
- Response of composite fuselage sandwich side panels subjected to internal pressure and axial tension
- Response of composite panels with stiffness gradients due to stiffener terminations and cutouts
- Robust hybrid finite element methods for antennas and microwave circuits
- Rocket thrust chamber thermal barrier coatings : final report
- Rotating shake test and modal analysis of a model helicopter rotor blade
- SEADYN analysis of a tow line for a high altitude towed glider : under contract NAS3-27186
- SPAR improved structural/fluid dynamic analysis capability : final report
- SSME structural dynamic model development : phase II, final report
- STARS, an integrated, multidisciplinary, finite-element, structural, fluids, aeroelastic, and aeroservoelastic analysis computer program
- STARS, an integrated, multidisciplinary, finite-element, structural, fluids, aeroelastic, and aeroservoelastic analysis computer program
- Significance of strain in formulation in theory of solid mechanics
- Simulation of two-fluid flows by the least-squares finite element method using a continuous surface tension model
- Single axis piezoceramic gimbal
- Space shuttle production verification motor-1 (PV-1) static fire : final test report, Volume 1
- Specimens and reusable fixturing for testing advanced aeropropulsion materials under in-plane biaxial loading, Part 1, Results of conceptual design study
- Statistical Energy Analysis (SEA) and Energy Finite Element Analysis (EFEA) predictions for a floor-equipped composite cylinder
- Stochastic simulation of mudcrack damage formation in an environmental barrier coating
- Strain-based damage determination using finite element analysis for structural health management
- Stress analysis of B-52 pylon hooks for carrying the X-38 drop test vehicle
- Structural analysis of a thermal insulation retainer assembly
- Structural analysis of composite flywheels : an integrated NDE and FEM approach
- Structural and thermal response of 30 cm diameter ion thruster optics
- Structural evaluation of a space main engine (SSME) high pressure fuel turbopump turbine blade
- Study of the effects of implantation on the high temperature corrosion and hydrogen permeability of Fe-Ni-Cr and Ni-Cr-A1 alloys
- Substructure system identification for finite element model updating : final report, NASA grant no. NAG8-1130
- Taxiing, take-off, and landing simulation of the high speed civil transport aircraft
- Taxiing, take-off, and landing simulation of the high speed civil transport aircraft
- Test and analysis of composite hat stringer pull-off test specimens
- Test methodology development for experimental structural assessment of ASC planar spring material for long-term durability
- The L1 finite element method for pure convection problems
- The P1-RKDG method for two-dimensional Euler equations of gas dynamics
- The analysis of adhesively bonded advanced composite joints using joint finite elements
- The applicability of the generalized method of cells for analyzing discontinuously reinforced composites
- The computational structural mechanics testbed generic structural-element processor manual
- The development of directional decohesion finite elements for multiscale failure analysis of metallic polycrystals
- The effect of temperature dependent material nonlinearities on the response of piezoelectric composite plates
- The influence of gyroscopic forces on the dynamic behavior and flutter of rotating blades
- The influence of lamination angles on the interior noise levels of an aircraft
- The influence of lamination angles on the interior noise levels of an aircraft
- The interpretation of crustal dynamics data in terms of plate interactions and active tectonics of the "Anatolian plate" and surrounding regions in the Middle East : semi-annual report to National Aeronautics and Space Administration (crustal dynamics)
- The merging of fatigue and fracture mechanics concepts : a historical perspective
- The role of multiphysics simulation in multidisciplinary analysis
- The role of multiphysics simulation in multidisciplinary analysis
- The solution of radiation transport equations with adaptive finite elements
- Theoretical and software considerations for nonlinear dynamic analysis
- Thermal analysis of a metallic wing glove for a Mach-8 boundary-layer experiment
- Thermal and mechanical buckling analysis of hypersonic aircraft hat-stiffened panels with varying face sheet geometry and fiber orientation
- Thermal and mechanical buckling analysis of hypersonic aircraft hat-stiffened panels with varying face sheet geometry and fiber orientation
- Thermal behavior of a titanium honeycomb-core sandwich panel
- Thermal/structural analysis of the shaft disk region of a fan drive system
- Three-dimensional elastic-plastic analysis of shallow cracks in single-edge-crack-tension specimens
- Three-dimensional elastic-plastic finite-element analysis of fatigue crack propagation
- Three-dimensional simulations of Marangoni-Benard convection in small containers by the least-squares finite element method
- Two-dimensional nonlinear finite element analysis of CMC microstructures
- Unified control/structure design and modeling research : final report
- User's manual for FEMOM3DR : version 1.0
- User's manual for FEMOM3DS : version 1.0
- User's manual for GAMNAS--Geometric and material nonlinear analysis of structures
- User-defined material model for progressive failure analysis
- Validation of design and analysis techniques of tailored composite structures
- Variable-complexity multidisciplinary optimization on parallel computers : final report, NAG-1-1562
- Verification of orthogrid finite element modeling techniques
- Verification of orthogrid finite element modeling techniques
- Vibration transmission through rolling element bearings in geared rotor systems
- Vibrational analysis of engine components using neural-net processing and electronic holography
- Viscoelastic relaxation of topographic highs on Venus to produce coronae
- Welding as science : applying basic engineering principles to the discipline
- Wing shape sensing from measured strain
- Wing-body aeroelasticity on parallel computers
- ZIP2DL, an elastic-plastic, large-rotation finite-element stress analysis and crack-growth simulation program
- ZIP2DL, an elastic-plastic, large-rotation finite-element stress analysis and crack-growth simulation program

## Embed

### Settings

Select options that apply then copy and paste the RDF/HTML data fragment to include in your application

Embed this data in a secure (HTTPS) page:

Layout options:

Include data citation:

<div class="citation" vocab="http://schema.org/"><i class="fa fa-external-link-square fa-fw"></i> Data from <span resource="http://link.umsl.edu/resource/9Nx7ketqSGg/" typeof="CategoryCode http://bibfra.me/vocab/lite/Concept"><span property="name http://bibfra.me/vocab/lite/label"><a href="http://link.umsl.edu/resource/9Nx7ketqSGg/">Finite element method</a></span> - <span property="potentialAction" typeOf="OrganizeAction"><span property="agent" typeof="LibrarySystem http://library.link/vocab/LibrarySystem" resource="http://link.umsl.edu/"><span property="name http://bibfra.me/vocab/lite/label"><a property="url" href="http://link.umsl.edu/">University of Missouri-St. Louis Libraries</a></span></span></span></span></div>

Note: Adjust the width and height settings defined in the RDF/HTML code fragment to best match your requirements

### Preview

## Cite Data - Experimental

### Data Citation of the Concept Finite element method

Copy and paste the following RDF/HTML data fragment to cite this resource

`<div class="citation" vocab="http://schema.org/"><i class="fa fa-external-link-square fa-fw"></i> Data from <span resource="http://link.umsl.edu/resource/9Nx7ketqSGg/" typeof="CategoryCode http://bibfra.me/vocab/lite/Concept"><span property="name http://bibfra.me/vocab/lite/label"><a href="http://link.umsl.edu/resource/9Nx7ketqSGg/">Finite element method</a></span> - <span property="potentialAction" typeOf="OrganizeAction"><span property="agent" typeof="LibrarySystem http://library.link/vocab/LibrarySystem" resource="http://link.umsl.edu/"><span property="name http://bibfra.me/vocab/lite/label"><a property="url" href="http://link.umsl.edu/">University of Missouri-St. Louis Libraries</a></span></span></span></span></div>`