George C. Marshall Space Flight Center
Resource Information
The organization George C. Marshall Space Flight Center represents an institution, an association, or corporate body that is associated with resources found in University of Missouri-St. Louis Libraries.
The Resource
George C. Marshall Space Flight Center
Resource Information
The organization George C. Marshall Space Flight Center represents an institution, an association, or corporate body that is associated with resources found in University of Missouri-St. Louis Libraries.
- Label
- George C. Marshall Space Flight Center
A sample of Items by the Organization George C. Marshall Space Flight Center See All
8 Items that are about the Organization George C. Marshall Space Flight Center
Context
Context of George C. Marshall Space Flight CenterContributor of
No resources found
No enriched resources found
- "An investigation of the detection of tornadic thunderstorms by observing storm top features using geosynchronous satellite imagery"
- 11th International Conference on Atmospheric Electricity : proceedings of a conference held in Guntersville, Alabama, June 7-11, 1999
- 3 helium/4 helium dilution cryocooler for space
- 31st Aerospace Mechanisms Symposium : proceedings of a symposium held at the Huntsville Marriott, Huntsville, Alabama and hosted by NASA, George C. Marshall Space Flight Center and sponsored by Lockheed Martin Missiles and Space and the Aerospace Mechanisms Symposium Committee, May 14-16, 1997
- 5000 gpm firefighting module evaluation test
- A "Kane's Dynamics" model for the active rack isolation system
- A "Kane's Dynamics" model for the active rack isolation system, Part 3, Addition of umbilicals to the nonlinear model
- A 20k payload launch vehicle fast track development concept using an RD-180 engine and a Centaur upper stage
- A Guide for community technology transfer : prepared for ... George C. Marshall Space Flight Center
- A NASA recipe for protein crystallography
- A TREETOPS simulation of the STABLE microgravity vibration isolation system
- A biosensor for cadium based on bioconvective patterns
- A biosensor for cadmium based on bioconvective patterns
- A browse facility for earth science remote sensing data : Center Director's Discretionary Fund Final Report (Project 91-09)
- A case study for probabilistic methods validation (MSFC Center Director's Discretionary fund final report, Project No. 94-26)
- A case study for probabilistic methods validation (MSFC Center Director's Disretionary fund final report, Project No. 94-26)
- A case study of analysis methods for large deflections of a cantilever beam
- A cloud, precipitation and electrification modeling effort for COHMEX
- A comparison of chromic acid and sulfuric acid anodizing
- A comparison of high cycle fatigue methodologies
- A comparison of quasi-static indentation to low-velocity impact
- A comparison of quasi-static indentation to low-velocity impact
- A comparison of single-cycle versus multiple-cycle proof testing strategies
- A compendium of wind statistics and models for the NASA space shuttle and other aerospace vehicle programs
- A computational study of multiple jet and wall interaction
- A computer system to analyze showers in nuclear emulsions : Center Director's discretionary fund final report
- A control design for the attitude control and determination system for the Magnetosphere Imager spacecraft
- A critical evaluation of various methods for the analysis of flow-solid interaction in a nest of thin cylinders subjected to cross flows : interim report
- A damage resistance comparison between candidate polymer matrix composite feedline materials
- A damage tolerance comparison of IM7/8551 and IM8G/8553 carbon/epoxy composites
- A damage tolerance comparison of composite hat-stiffened and honeycomb sandwich structure for launch vehicle interstage applications
- A data base and analysis program for shuttle main engine dynamic pressure measurements : final report
- A digital imaging photometry system for cometary data acquisition : Center director's discretionary fund final report
- A finite element solver for 3-D compressible viscous flows
- A generalized reusable guidance algorithm for optimal aerobraking
- A ground-based study on extruder standoff distance for the 3D printing in zero gravity technology demonstration mission
- A guidance and control assessment of three vertical landing options for RLV
- A history of aerospace problems, their solutions, their lessons
- A meteoroid handbook for aerospace engineers and managers
- A new NASA/MSFC mission analysis global cloud cover data base
- A new aging treatment for improving cryogenic toughness of the main structural alloy of the super lightweight tank
- A new aging treatment for improving cryogenic toughness of the main structural alloy of the super lightweight tank
- A new sun : the solar results from Skylab
- A new technique for achieving impact velocities greater than 10km/sec
- A noncontracting scanning photoelectron emission technique for bonding surface cleanliness inspection
- A photometric technique for determining fluid concentration using consumer-grade hardware
- A plan for spacecraft automated rendezvous
- A programmable heater control circuit for spacecraft : Center Director's Discretionary Fund final report project no. 90-19
- A real-time recursive filter for the attitude determination of the Spacelab instrument pointing subsystem
- A recommended procedure for estimating the cosmic-ray spectral parameter of a simple power law with applications to detector design
- A reduced gravity fiber pulling aparatus
- A review of electrical impedance spectrometry methods for parametric estimation of physiologic fluid volumes : (MSFC Center Director's Discretionary Fund final report, project no. 96-03)
- A review of melt and vapor growth techniques for polydiacetylene thin films for nonlinear optical applications
- A review of the Ginzburg-Syrovatskii's galactic cosmic-ray propagation model and its leaky-box limit
- A review of welding in space and related technologies
- A revised thermosphere for the Mars Global Reference Atmospheric Model (Mars-GRAM version 3.4)
- A revised thermosphere for the Mars Global Reference Atmospheric Model (Mars-GRAM version 3.4)
- A satellite-based radar wind sensor
- A shadowgraph study of space transportation system (STS) : the space shuttle launch vehicle (SSLV)
- A shadowgraphic study of the national launch system's 1 1/2 stage vehicle configuration and heavy lift launch vehicle configuration
- A simplistic look at limit stresses from random loading
- A simulation model for probabilistic analysis of Space Shuttle abort modes
- A simulation of the instrument pointing system for the Astro-1 mission
- A solar magnetic and velocity field measurement system for Spacelab 2 : the solar optical universal polarimeter (SOUP) : final report
- A strategy for integrating a large finite element model using MSC NASTRAN/PATRAN : X-33 lessons learned
- A study of crystal growth by solution technique
- A study of enhancing critical current densities (JC) and critical temperature (TC) of high-temperature superconductors : Center Director's discretionary fund final report (project 90-N26)
- A study of friction stir welded 2195 Al-Li alloy by the scanning reference electrode technique
- A study of microstructural characteristics of Ni-based superalloys at high temperatures : final technical report
- A study on strength evaluations of EDNi/EDCu/NARloy-Z bonded joints
- A substructure coupling procedure applicable to general linear time-invariant dynamic systems : a report to NASA Marshall Space Flight Center
- A summary of laboratory testing performed to characterize an elastomeric O-ring material to be used in the redesigned solid rocket motors of the space transportation system
- A survey of geographical information systems applications for the Earth Science and Applications Division, Space Sciences Laboratory, Marshall Space Flight Center
- A survey of radiation measurements made aboard Russian spacecraft in low-earth orbit
- A systematic study of instrument variables upon the accuracy of microprobe analysis
- A torque, tension, and stress corrosion evaluation of high strength A286 bolts
- A transient response analysis of the space shuttle vehicle during liftoff
- A transient response method for linear coupled substructures
- A users' guide to the trace contaminant control simulation computer program
- A variational assimilation method for satellite and conventional data : development of basic model for diagnosis of cyclone systems
- AFT segment dome-to-stiffener factory joint insulation void elimination : final report
- AGCE related studies of baroclinic flows in spherical geometry
- ANSYS duplicate finite-element checker routine
- AXAF X-ray calibration spectrometers
- Acoustic emission monitoring of the DC-XA composite liquid hydrogen tank during structural testing
- Acoustic emission monitoring of the DC-XA composite liquid hydrogen tank during structural testing
- Acoustic emission-based health monitoring of space launch system structures
- Activation calculations for trapped protons below 200 MeV, Appendix
- Additional support for the TDK/MABL computer program : final report
- Advanced CFD methodology for fast transients encountered in nonlinear combustion instability problems : SBIR phase II final report (restricted circulation)
- Advanced Solar Observatory (ASO) accommodations requirements study
- Advanced exploration systems atmosphere resource recovery and environmental monitoring
- Advanced liquid oxygen (LO2) propellant conditioning concept testing
- Advanced materials for exploration task research results
- Advanced microwave precipitation radiometer (AMPR) for remote observation of precipitation : final technical report (December 1990)
- Advanced turbine study : final report
- Advanced x-ray timing array mission : conceptual spacecraft design study
- Adventures in rocket science
- Aerospace Environmental Technology Conference : executive summary : summary of a conference held in Huntsville, Alabama, August 10-11, 1994
- Aerospace Environmental Technology Conference : summary of a conference held in Huntsville, Alabama, August 10-11, 1994
- Aerospace threaded fastener strength in combined shear and tension loading
- Affordable In-Space Transportation
- Affordable In-space transportation
- Aluminum U-groove weld enhancement based on experimental stress analyses
- Ampoule failure sensor time response testing : experiment 1
- Ampoule failure sensor time response testing : experiments 2 and 3
- An Application of "high authority/low authority control" and "positivity"
- An airport wind shear detection and warning system using Doppler radar : a feasibility study
- An assessment of molten metal detachment hazards for electron beam welding in the space environment : analysis and test results
- An assessment of the technology of automated rendezvous and capture in space
- An assessment on finite-element modeling techniques for thick-solid/thin-shell joints analysis
- An estimate of the North Atlantic basin tropical cyclone activity for the 2010 hurricane season
- An estimate of the North Atlantic basin tropical cyclone activity for the 2010 hurricane season
- An estimate of the size and shape of sunspot cycle 24 based on its early cycle behavior using the Hathaway-Wilson-Reichmann shape-fitting function
- An estimation of the likelihood of significant eruptions during 2000-2009 using Poisson statistics on two-point moving averages of the volcanic time series
- An evaluation of bearings operating in a cryogenic environment with silicon nitride rolling elements
- An evaluation of corrosion protection by two epoxy primers on 2219-T87 and 7075-T73 aluminum
- An evaluation of the General Dynamics 20 kHz 5 kW breadboard for space station electrical power at MSFS
- An evaluation of the total quality management implementation strategy for the advanced solid rocket motor project at NASA's Marshall Space Flight Center
- An exact solution for the solidification of a liquid slab of binary mixture
- An examination of impact damage in glass/phenolic and aluminum honeycomb core composite panels
- An examination of the Hadley sea-surface temperature time series for the Niño 3.4 region
- An extended forecast of the frequencies of North Atlantic basin tropical cyclone activity for 2009
- An inelastic analysis of a welded aluminum joint
- An intelligent position-specific training system for missions operations
- An investigation of squeeze-cast alloy 718 : Center Director's discretionary fund final report (project number 90-10)
- An oil flow study of the reference Shuttle-C configuration
- An optical technology study on large aperture telescopes
- An unbiased X-ray sampling of stars within 25 parsecs of the sun : final report
- Analyses of physical-chemical processes governing SSME internal fluid flows : progress report for May 1985
- Analysis and assessment of peak lightning current probabilities at the NASA Kennedy Space Center
- Analysis and derivation of allocations for fiber contaminants in liquid bipropellant systems
- Analysis and interpretation of diffuse X-ray emission using data from the Einstein satellite
- Analysis for thermo-chemical decomposition of composite structures : interim report (June 1992 to June 1993)
- Analysis of Doppler lidar wind measurements : final technical report
- Analysis of International Space Station vehicle materials exposed on Materials International Space Station Experiment from 2001 to 2011
- Analysis of aerodynamic coefficients using gust gradient data : spanwise turbulence effects on airplane response
- Analysis of airborne doppler lidar, doppler radar, and tall tower measurements of atmospheric flows in quiescent and stormy weather
- Analysis of data from NASA B-57B gust gradient program : final report
- Analysis of debris from Spacelab space life sciences
- Analysis of fluorinated polyimides flown on the Materials International Space Station Experiment
- Analysis of internal flows relative to the space shuttle main engine : final report
- Analysis of large space structures assembly : man/machine assembly analysis
- Analysis of lightning field changes produced by Florida thunderstorms
- Analysis of microgravity experiments conducted on the Apollo spacecraft
- Analysis of rolling contact spall life in 440C steel bearing rims
- Analysis of satellite drag and spin decay data : final technical report
- Analysis of space environment damage to solar cell assemblies from LDEF experiment A0171-GSFC test plate : final report, 21 Jul. 1993 - 19 Aug. 1994
- Analysis of stress concentration at holes in components made of 2195 aluminum-lithium
- Analysis of stress concentration in the Dutton groove regions of the super lightweight external tank
- Analysis of the NASA/MSFC Airborne Doppler Lidar results from San Gorgonio Pass California
- Analysis of the NASA/MSFC airborne doppler lidar results from San Gorgonio Pass, California
- Analysis of the ability of United States and Russian trace contaminant control systems to meet U.S. 180-day and Russian 360-day spacecraft maximum allowable concentrations
- Analysis of the bivariate parameter wind differences between Jimsphere and Windsonde
- Analysis of wind profile measurements from an instrumented aircraft : interim final report
- Analysis techniques for residual acceleration data
- Analytical control test plan and microbiological methods for the water recovery test
- Analytical investigation of the dynamics of tethered constellations in Earth orbit (phase II) : quarterly report # 1, for the period period 22 February 1985 through 21 June 1985
- Analytical investigation of the dynamics of tethered constellations in Earth orbit (phase II) : quarterly report # 10, for the period 1 July 1987 through 30 September 1987
- Analytical investigation of the dynamics of tethered constellations in Earth orbit (phase II) : quarterly report # 2, for the period 22 June 1985 through 21 September 1985
- Analytical investigation of the dynamics of tethered constellations in Earth orbit (phase II) : quarterly report # 3, for the period 22 September 1985 through 21 December 1985
- Analytical investigation of the dynamics of tethered constellations in Earth orbit (phase II) : quarterly report # 4, for the period 22 December 1985 through 21 March 1986
- Analytical investigation of the dynamics of tethered constellations in Earth orbit (phase II) : quarterly report # 5, for the period 22 March 1986 through 21 June 1986
- Analytical investigation of the dynamics of tethered constellations in Earth orbit (phase II) : quarterly report # 6, for the period 22 June 1986 through 21 September 1986
- Analytical investigation of the dynamics of tethered constellations in Earth orbit (phase II) : quarterly report # 6, for the period 22 June 1986 through 21 September 1986
- Analytical investigation of the dynamics of tethered constellations in Earth orbit (phase II) : quarterly report # 9, for the period 1 April 1987 through 30 June 1987
- Analytical round robin for elastic-plastic analysis of surface cracked plates : phase I results
- Analytical round robin for elastic-plastic analysis of surface cracked plates : phase II results
- Annual report on contract NAS8-36645 entitled partial analysis of experiment LDEF A-0114 : for the period ending May 31st, 1986
- Annual technical report on protein crystal growth in low gravity : April 27, 1989 through April 26, 1990
- Anthropomorphic teleoperation : controlling remote manipulators with the DataGlove : Center director's discretionary fund final report (project number 89-06)
- Apollo lightcraft project
- Application of power metallurgy techniques to produce improved bearing elements for liquid rocket engines : final report
- Application of rapid prototyping and wire arc spray to the fabrication of injection mold tools : (MSFC Center Director's Discretionary Fund final report, project No. 99-05)
- Application of rapid prototyping methods to high-speed wind tunnel testing (MSFC Center Director's Discretionary Fund final report, project no. 96-21)
- Application of satellite data in variational analysis for global cyclonic systems : status report
- Application of satellite data in variational analysis for global cyclonic systems : status report
- Application of satellite data to the variational analysis of the three dimensional wind field
- Applications of low lift to drag ratio aerobrakes using angle of attack variation for control
- Applications of tethers in space : a review of workshop recommendations
- Applications of tethers in space : a review of workshop recommendations
- Applying Monte Carlo simulation to launch vehicle design and requirements analysis
- Approaches and possible improvements in the area of multibody dynamics modeling
- Ares I Scale Model Acoustic Test overpressure results
- Ares V utilization in support of a human mission to Mars
- Assessment of a head-mounted miniature monitor
- Assessment of corona/arcing hazard for electron beam welding in space shuttle bay at LEO for ISWE : test results
- Assessment of corona/arcing hazard for electron beam welding in space shuttle bay at LEO for ISWE, test results
- Assessment of the operating characteristics of the SSME LOX turbopump pump-end bearing
- Astrophysical payload accommodation on the space station
- Atmosphere resource recovery and environmental monitoring trace contaminant control through FY 2012
- Atmospheric environment for Space Shuttle (STS-11) launch
- Atmospheric environment for Space Shuttle (STS-9) launch
- Atmospheric environment for Space Shuttle Atlantis (STS-43) launch
- Atmospheric environment for space shuttle (STS-26) launch
- Atmospheric environment for space shuttle (STS-27) launch
- Atmospheric environment for space shuttle (STS-28) launch
- Atmospheric environment for space shuttle (STS-31) launch
- Atmospheric environment for space shuttle (STS-33) launch
- Atmospheric environment for space shuttle (STS-34) launch
- Atmospheric environment for space shuttle (STS-35) launch
- Atmospheric environment for space shuttle (STS-36) launch
- Atmospheric environment for space shuttle (STS-37) launch
- Atmospheric environment for space shuttle (STS-38) launch
- Atmospheric environment for space shuttle (STS-41) launch
- Atmospheric environment for space shuttle (STS-51L) launch
- Atmospheric environment for space shuttle Atlantis (STS-39) launch
- Atmospheric environment for space shuttle Columbia (STS-32) launch
- Atmospheric environment for space shuttle Columbia (STS-40) launch
- Atmospheric planetary-wave response to external forcing
- Atomization and mixing study
- Atomization and mixing study : interim report
- Attitude profile design program : final report
- Auroral thermosphere temperatures from observations of 6300 Å emissions
- Automated Fluid Interface System (AFIS) : final report document
- Automated documentation generator for advanced protein crystal growth : final technical report ...
- Automatic mathematical modeling for real time simulation program (AI application)
- Autonomous integrated GPS/INS navigation experiment for OMV : phase I feasibility study
- Autonomous momentum management for space station : final report, 15 October 1984
- BUGS system clock distributor
- Basic mechanics of laminated composite plates
- Bearing defect signature analysis using advanced nonlinear signal analysis in a controlled environment : CDDF final report, project no. 93-10
- Bellows flow-induced vibrations
- Beneficiation of Stillwater Complex rock for the production of lunar simulants
- Beta systems error analysis : final report
- Bioreactor expands health research : NASA device gives new dimension to cell science
- Blade tip rubbing stress prediction : final report
- Boundary layer simulation improvement : progress report
- Buckling of composite beams : CDDF final report : project no. 91-20
- CERRES, Combined Release and Radiation Effects Satellite Program summary
- CORSSTOL, Cylinder Optimization of Rings, Skin, and Stringers with Tolerance Sensitivity
- CRRES combined radiation and release effects satellite program
- CRRES, the Combined Release and Radiation Effects Satellite program directory
- Cable coupling lightning transient qualification : final test report
- Calculated transmission using a portable spectroreflectometer
- Calibration of the ISEE plasma composition experiment
- Calibration, navigation, and registration of MAMS data for FIFE
- Calibration, navigation, and registration of MAMS data for FIFE
- Carbon deposition model for oxygen-hydrocarbon combustion : task VI, data analysis and formulation of an empirical model
- Case studies of clear air turbulence using the Diagnostic Richardson Number Tendency formulation
- Catalytic methods using molecular oxygen for treatment of PMMS & ECLSS waste streams : final report
- Cellular solidification in a monotectic system : Center director's discretionary fund final report
- Characterization of low-temperature, co-fired ceramic-manufactured electrostatic thruster---closeout report
- Characterization of silicon-gate CMOS/SOS integrated circuits processed with ion implantation
- Characterizations of electrical properties of high Tc superconducting materials : Center director's discretionary fund final report
- Characterizing secondary debris impact ejecta
- Closeout report for the refractory metal accelerated heat pipe life test activity
- Coaligned observations of solar magnetic fields at different heights : MSFC Center Director's discretionary fund final report (project 88-10)
- Combustion of lox with H2(g) under subcritical, critical and supercritical conditions (task 1) and experimental observation of dense spray and mixing of impinging jets (task 2) : semi-annual report
- Commerce lab : mission analysis payload integration study : final report
- Commercialization of the power factor controller : final report
- Compact fuel element environment test
- Comparative stress corrosion cracking and general corrosion resistance of annealed and hardened 440C stainless steel : new techniques in stress corrosion testing
- Comparison of commercial electromagnetic interference test techniques to NASA electromagnetic interference test techniques
- Comparison of epifluorescent viable bacterial count methods
- Comparison of observed beta cloth interactions with simulated and actual space environment
- Comparison of open-hole compression strength and compression after impact strength on carbon fiber/epoxy laminates for the Ares I composite interstage
- Comparison of spacecraft contamination models with well-defined flight experiment
- Comparison of the variations of sunspot number, number of sunspot groups, and sunspot area, 1875-2013
- Comparison of two computer codes for crack growth analysis : NASCRAC versus NASA/FLAGRO
- Comparison of wind and turbulence measurements from Doppler lidar and instrumented aircraft : final report
- Compendium of fracture mechanics problems
- Complete the development and construction of a spaceborne hydrogen maser clock : final report
- Component response to random vibratory motion of the carrier vehicle
- Composite processing development to improve interlaminar strength using ply interface particles : (Center Director's discretionary fund final report, no. 93-13)
- Composites for exploration upper stage
- Composites materials and manufacturing technologies for space applications
- Comprehensive design reliability activities for aerospace propulsion systems
- Comprehensive structural dynamic analysis of the SSME/AT fuel pump first-stage turbine blade
- Computational analysis of the SSME fuel preburner flow : final report
- Computational fluid mechanics utilizing the variational principle of modeling damping seals
- Computer-Aided System Engineering and Analysis (CASE/A) : user's manual, version 5.0
- Computer-Aided System Engineering and Analysis (CASE/A) programmer's manual, version 5
- Computer-Aided System Engineering and Analysis (CASE/A) programmer's manual, version 5.0
- Computerized atmospheric trace contaminant control simulation for manned spacecraft
- Concept definition study for recovery of tumbling satellites : final technical report
- Concept development evaluation for John Deere/UA STS middeck experiment location
- Concept report : experimental vector magnetograph (EXVM) operational configuration balloon flight assembly
- Concepts for microgravity experiments utilizing gloveboxes
- Configuration evaluation and criteria plan, Vol.2, Evaluation criteria plan (preliminary), space transportation main engine (STME) configuration study
- Construction of a chemical sensor/instrumentation package using fiber optic and miniaturization technology : (MSFC Center director's discretionary fund final report, project no. 97-12)
- Contamination assessment for OSSA Space Station IOC payloads : final report for July 25, 1986 - July 25, 1987
- Contamination control engineering design guidelines for the aerospace community
- Contamination effects on EUV optics
- Contamination effects study : final report
- Cornea optical topographical scan system (COTSS) : final report
- Correlation of radiation dosage with mechanical properties of thin films
- Corrosion studies of 2195 Al-Li alloy and 2219 Al alloy with differing surface treatments
- Corrosion studies of wrought and cast NASA-23 alloy
- Cosmic Ray Nuclei (CRN) detector investigation
- Coupled loads analysis for space shuttle payloads
- Coupled particle transport and pattern formation in a nonlinear leaky-box model
- Cross-sectional examination of the damage zone in impacted specimens of carbon/epoxy and carbon/peek composites
- Cryogenic propellant storage and transfer technology demonstration : prephase a government point-of-departure concept study
- Crystal growth furnace (CGF) : final report, contract no. NAS8-36637
- Damage tolerance of candidate thermoset composites for use on single stage to orbit vehicles
- Damping mechanisms for microgravity vibration isolation : (MSFC Center Director's Discretionary Fund final report, project No. 94-07)
- Data evaluation, analysis and scientific study
- Database for the tribological properties of self-lubricating materials
- Decadal trends of Atlantic Basin tropical cyclones (1950-1999)
- Decadal variation of the number of El Niño onsets and El Niño-related months and estimating the likelihood of El Niño onset in a warming world
- Deciphering the long-term trend of Atlantic Basin intense hurricanes : more active versus less active during the present epoch
- Deciphering the long-term trend of Atlantic basin intense hurricanes : more active versus less active during the present epoch
- Definition and preliminary design of the Laser Atmospheric Wind Sounder, LAWS : phase I, final report
- Definition and preliminary design of the Laser Atmospheric Wind Sounder, LAWS : phase II, final report
- Definition of avionics concepts for a heavy lift cargo vehicle : appendix A, final report
- Definition of ground test for verification of large space structure control : final report
- Definition of ground test for verification of large space structure control : tenth month r&d status report
- Definition of large components assembled on-orbit and robot compatible mechanical joints
- Definition of technology development missions for early space stations : large space structures, phase II : final report
- Deflections of a uniformly loaded circular plate with multiple support points
- Degradation factor approach for impacted composite structural assessment (MSFC Center director's discretionary fund final report, project No. 96-17)
- Dendritic morphology and microsegregation in directionally solidified superalloy, PWA-1480, single crystal : effect of gravity--Center Director's Discretionary Fund report
- Design and fabrication of a tank-applied broad area cooling shield coupon
- Design and specifications for the highland regolith prototype simulants NU-LHT-1M and -2M
- Design and test of low-profile composite aerospace tank dome : (MSFC Center Director's Discretionary Fund final report, project no. 96-28)
- Design definition of the laser atmospheric wind sounder (LAWS) : phase II
- Design guidelines for shielding effectiveness, current carrying capability, and the enhancement of conductivity of composite materials : under contract NAS8-39983
- Design of a welded joint for robotic, on-orbit assembly of space trusses
- Design of launch vehicle flight control augmentors and resulting flight stability and control (Center Director's discretionary fund project 93-05, part III)
- Design of launch vehicle flight control augmentors and resulting flight stability and control (center director's discretionary fund project 93-05, part III)
- Design of multiple-ply laminated composite tapered beams
- Design of refractory metal heat pipe life test environment chamber, cooling system, and radio frequency heating system
- Design of refractory metal life test heat pipe and calorimeter
- Design verification test matrix development for the STME thrust chamber assembly
- Design, fabrication, and delivery of a miniature Cassegrainian concentrator solar array system : final technical report
- Detailed study of oxidation/wear mechanism in lox turbopump bearings
- Determination of significant composite processing factors by designed experiment : (MSFC Center Director's Discretionary Fund final report, project no. 95-23)
- Determination of the gaseous hydrogen ductile-brittle transition in copper-nickel alloys
- Development and analysis of cold trap for use in fission surface power-primary test circuit
- Development and marketing of a prosthetic urinary control valve system : final report
- Development of a computational aero/fluids analysis system : final report
- Development of a continuous spinning process for producing silicon carbide--silicon nitride precursor fibers : final report
- Development of a fiber optic high temperature strain sensor
- Development of a gas-fed pulse detonation research engine
- Development of a global model for atmospheric backscatter at CO2 wavelengths
- Development of a global model for atmospheric backscatter at CO2 wavelengths : monthly progress report, April 14-May 13, 1984
- Development of a large field-of-view KD*P modulator : Center director's discretionary fund final report (project no. 91-23)
- Development of a new seal for use on large openings of pressurized spacecraft
- Development of a practical methodology for elastic-plastic and fully plastic fatigue crack growth
- Development of a probabilistic dynamic synthesis method for the analysis of nondeterministic structures
- Development of a qualification standard for adhesives used in hybrid microcircuits
- Development of a radiation-hard CMOS process : final technical report
- Development of a sensitive superconducting gravity gradiometer for geological and navigational applications
- Development of a shuttle plume radiation heating indicator : final report
- Development of a shuttle recovery commercial materials processing in space (CMPS) program : final report
- Development of a stable electro-optical modulator
- Development of an additively manufactured capacitive humidity sensor for the international space station
- Development of an improved protective cover/light block for multilayer insulation
- Development of an optical fiber interferometer for detection of surface flaws in aluminum
- Development of computerized analysis for solid propellant combustion (ISAP-2) : semi-annual report
- Development of deployable structures for large space platforms
- Development of homotopy algorithms for fixed-order mixed H2/H [infinity] controller synthesis
- Development of infrared sensors using energy transfer/energy upconversion process : study of laser excited fluorescence in rare earth ion doped crystals
- Development of low-cost custom hybrid microcircuit technology : final report
- Development of new techniques for the characterization of crystals and their growth solutions : Center director's discretionary fund final report
- Development of optical systems : final technical report
- Development of space telescope non-ORU hardware : final report
- Development of static system procedures to study aquatic biofilms and their responses to disinfection and invading species
- Development of tailorable electrically conductive thermal control material systems
- Development of the sonic pump levitator : final report
- Developmental problems and their solution for the safe shuttle main engine alternate liquid oxygen high-pressure turbopump : anomaly or failure investigation the key
- Diagnosis of vertical motions from VAS retrievals during a convective outbreak : final report, contract NAS8-35330
- Differential collision cross-sections for atomic oxygen : final technical progress report
- Differential thermal analysis of lunar soil simulant
- Digital processing of mesoscale analysis and space sensor data : final report
- Digital systems design language : design synthesis of digital systems
- Direct visualization of shock waves in supersonic space shuttle flight
- Distributed control using linear momentum exchange devices
- Documentation of stainless steel lithium circuit test section design
- Drop tube technical tasks : final report
- Dual ion spectrometers and their calibration for the fast plasma investigation on NASA's magnetospheric multiscale mission
- Dual-throat thruster thermal model : final report
- Duct flow nonuniformities : effects of struts in SSME HGM II+ : interim report
- Duct flow nonuniformities for space shuttle main engine (SSME) : final report
- Duct flow nonuniformities study for Space Shuttle main engine : technical report
- Dwell time and surface parameter effects on removal of silicone oil from D6ac steel using TCA
- Dynamics Explorer 1, retarding ion mass spectrometer summary spectrograms : 81/280 to 81/365 spin-time spectrograms for H[+], He[+], O[+], N[+], O[++], M/Z=2, and molecular ions
- Dynamics Explorer 1, retarding ion mass spectrometer summary spectrograms : 82/001 to 82/109 spin-time spectrograms for H[+], He[+], O[+], N[+], O[++], M/Z=2, and molecular ions
- Dynamics explorer 1, retarding ion mass spectrometer summary spectrograms--82/110 to 82/229 spin-time spectrograms for H+, He+, O+, N+, O++, M/Z=2, and molecular ions
- Dynamics explorer 1, retarding ion mass spectrometer summary spectrograms--82/230 to 82/265 spin-time spectrograms for H+, He+, O+, N+, O++, M/Z=2, and molecular ions
- ECLSS sustaining compatibility testing on urine processor assembly nonmetallic materials for reformulation of pretreated urine solution