Heat transfer
Resource Information
The concept Heat transfer represents the subject, aboutness, idea or notion of resources found in University of Missouri-St. Louis Libraries.
The Resource
Heat transfer
Resource Information
The concept Heat transfer represents the subject, aboutness, idea or notion of resources found in University of Missouri-St. Louis Libraries.
- Label
- Heat transfer
- Source
- nasat
170 Items that share the Concept Heat transfer
Context
Context of Heat transferSubject of
No resources found
No enriched resources found
- X-34 experimental aeroheating at Mach 6 and 10
- "Further developments of BEM for micro and macromechanical analyses of composites" : BEST-CMS (Boundary Element Software Technology-Composite Modeling System), user's manual : final technical report, NASA grant no. NAG3-1483, April 1993 - March 1997
- 1996 Coolant Flow Management Workshop : proceedings of the conference held at the Ohio Aerospace Institute ... Cleveland, Ohio, December 12-13, 1996
- A compendium of brazed microstructures for fission power systems applications
- A computer program for the computation of running gear temperatures using Green's function
- A direct-interface, fusible heat sink for astronaut cooling
- A heat transfer investigation of liquid and two-phase methane
- A numerical method for incompressible flow with heat transfer
- A study of cavitation-ignition bubble combustion
- A study of the effect of synoptic scale processes in GCM modelling : final technical report
- Aerothermodynamic measurement and prediction for modified orbiter at Mach 6 and 10
- Alternate high capacity heat pipe final report
- Altitude effects on thermal ice protection system performance; a study of an alternative approach
- An analysis and procedure for determining space environmental sink temperatures with selected computational results
- Analysis of aerospike plume induced base-heating environment
- Analysis of coupled seals, secondary and powerstream flow fields in aircraft and aerospace turbomachines
- Analysis of gas turbine rotor blade tip and shroud heat transfer
- Analysis of heat-transfer tests of an impingement-convection-and film-cooled vane in a cascade
- Analysis of thermal and reaction times for hydrogen reduction of lunar regolith
- Application of thin-film thermocouples to localized heat transfer measurements
- Approaches to validation of models for low gravity fluid behavior
- Approximation of engine casing temperature constraints for casing mounted electronics
- Augmentation of stagnation region heat transfer due to turbulence from a DLN can combustor
- Augmentation of stagnation region heat transfer due to turbulence from a DLN can combustor
- Blade heat transfer measurements and predictions in a transonic turbine cascade
- Blade heat transfer measurements and predictions in a transonic turbine cascade
- Burner liner thermal/structural load modeling
- Combustion performance and heat transfer characterization of lox/hydrocarbon type propellants : final report, volume II
- Comparison of predicted and measured turbine vane rough surface heat transfer
- Comparison of predicted and measured turbine vane rough surface heat transfer
- Computational aeroheating predictions for X-34
- Computational work to support FAP/SRW variable-speed power-turbine development
- Computer code for predicting coolant flow and heat transfer in turbomachinery
- Conceptual design of a moving belt radiator shuttle-attached experiment : technical requirements document
- Conjugate heat transfer analyses on the manifold for ramjet fuel injectors
- Current Lewis turbomachinery research : building on our legacy of excellence
- Current Lewis turbomachinery research : building on our legacy of excellence
- Deposit formation and heat transfer in hydrocarbon rocket fuels
- Design and test of a compact optics system for the pool boiling experiment
- Design and test plans for a non-nuclear fission power system technology demonstration unit
- Design, construction, and qualification of a microscale heater array for use in boiling heat transfer
- Development and integration of the Capillary Pumped Loop GAS and Hitchhiker flight experiments
- Development of a contact heat exchanger for a constructable radiator system
- Development of a device to deploy fluid droplets in microgravity
- Development of a device to deploy fluid droplets in microgravity
- Effect of protuberance shape and orientation on Space Shuttle Orbiter boundary-layer transition
- Effects of convection during the photodeposition of polydiacetylene thin films
- Effects of rotation on coolant passage heat transfer
- Effects of tip clearance and casing recess on heat transfer and stage efficiency in axial turbines
- Effects of tip clearance and casing recess on heat transfer and stage efficiency in axial turbines
- Emission FTIR analyses of thin microscopic patches of jet fuel residues deposited on heated metal surfaces : final report
- Endwall heat transfer measurements in a transonic turbine cascade
- Endwall heat transfer measurements in a transonic turbine cascade
- Endwall heat transfer measurements in a transonic turbine cascade
- Evaluation of capillary reinforced composites
- Evaluation of heat transfer and thermal stability of supercritical JP-7 fuel
- Evaluation of heat transfer and thermal stability of supercritical JP-7 fuel
- Evaluation of temperature gradient in Advanced Automated Directional Solidification Furnace (AADSF) by numerical simulation
- Examination of wave speed in rotating detonation engines using simplified computational fluid dynamics : prepared for 2018 SciTech Forum spnsored by the American Institute of Aeronautics and Astronautics Kissimmee, Florida, January 8-12, 2018
- Experience with advanced instrumentation in a hot section cascade
- Experimental and numerical characterization of a steady-state cylindrical blackbody cavity at 1100 degrees celsius
- Experimental and numerical characterization of a steady-state cylindrical blackbody cavity at 1100 degrees celsius
- Experimental heat transfer and bulk air temperature measurements for a multipass internal cooling model with ribs and bleed
- Experimental study of boundary layer transition with elevated freestream turbulence on a heated flat plate
- Experimental study of vane heat transfer and aerodynamics at elevated levels of turbulence
- Experimental study of vane heat transfer and film cooling at elevated levels of turbulence
- Final report on numerical study of magnetic damping during unidirectional solidification (NASA grant #: NCC3-435), duration: October 1, 1995 - September 30, 1997
- Final report on specialized technical assistance in studies of microgravity : NASA grant KSK-R10
- Fission surface power technology demonstration unit test results
- Flame radiation and liner heat transfer in a tubular-can combustor
- Flow Boiling and Condensation Experiment (FBCE) : capabilities and system description
- Flow boiling enhancement for thermal management systems : final report : from the Thermal Science Research Center (TSRC)
- Flow boiling with enhancement devices for cold plate coolant channel design : final report
- Flow boiling with enhancement devices for cold plate coolant channel design : semiannual report
- Flow control applications
- Flow in rotating serpentine coolant passages with skewed trip strips : under contract NAS3-27378
- Forced convection boiling and critical heat flux of ethanol in electrically heated tube tests
- Further shock tunnel studies of scramjet phenomena
- Further validation of a CFD code for calculating the performance of two-stage light gas guns
- Gas-jet and tangent-slot film cooling tests of a 12.50 cone at Mach number of 6.7
- Gear mesh loss-of-lubrication experiments and analytical simulation
- Generalized Fluid System Simulation Program, version 6.0
- Generalized fluid system simulation program, version 5.0--educational
- Heat rejection concepts for lunar fission surface power applications
- Heat transfer and flow on the first stage blade tip of a power generation gas turbine
- Heat transfer and flow on the first stage blade tip of a power generation gas turbine, Part 2, Simulation results
- Heat transfer computations of internal duct flows with combined hydraulic and thermal developing length
- Heat transfer computations of internal duct flows with combined hydraulic and thermal developing length
- Heat transfer on a film-cooled blade : effect of hole physics : prepared under contract NAS3-27571
- Heat transfer on a film-cooled rotating blade
- Heat transfer to two-phase air/water mixtures flowing in small tubes with inlet disequilibrium
- High pressure, earth-storable rocket technology
- High-area-ratio rocket nozzle at high combustion chamber pressure--experimental and analytical validation
- Impact of dissociation and sensible heat release on pulse detonation and gas turbine engine performance
- Implementation of a transition model in a NASA code and validation using heat transfer data on a turbine blade
- Improvement of the second - and third-moment modeling of turbulence
- Influence of coolant tube curvature on film cooling effectiveness as detected by infrared imagery
- Infrared low temperature turbine vane rough surface heat transfer measurements
- Infrared low temperature turbine vane rough surface heat transfer measurements
- Internal passage heat transfer prediction using multiblock grids and a [kappa-omega] turbulence model : under cooperative agreement NCC3-370
- Investigation of surface tension driven convection as a feasibility study for a micro-gravity experiment : final report
- Investigation of the effects of pressure gradient, temperature, and wall temperature ratio on the stagnation point heat transfer for circular cylinders and gas turbine vanes
- Large-scale liquid hydrogen tank rapid chill and fill testing for the advanced shuttle upper stage concept
- Metallized gelled propellants : oxygen/RP-1/aluminum rocket engine calorimeter heat transfer measurements and analysis
- Metallized gelled propellants : oxygen/RP-1/aluminum rocket engine calorimeter heat transfer measurements and analysis
- Metallized gelled propellants : oxygen/RP-1/aluminum rocket heat transfer and combustion measurements
- Metallized gelled propellants : oxygen/RP-1/aluminum rocket heat transfer and combustion measurements
- Microgravity liquid-gas two-phase flow : review of pressure drop and heat transfer correlations and guidelines for equipment operability
- Modeling of unsteady three-dimensional flows in multistage machines
- Modeling xenon tank pressurization using one-dimensional thermodynamic and heat transfer equations
- Navier-Stokes analysis of turbine blade heat transfer
- Nested subcritical flows within supercritical systems
- Numerical simulation of a low emissions gas turbine combustor using KIVA-II, Part II, Quick-quench/lean-combustion zones analysis
- Orbit transfer rocket engine technology program : enhanced heat transfer combustor technology : subtasks I & II, task C.1
- Overview of NASA multi-dimensional Stirling convertor code development and validation effort
- Parametric system model for a Stirling radioisotope generator
- Performance impact of deflagration to detonation transition enhancing obstacles
- Planetary geophysics and tectonics : final report for grant NAGW-1928
- Post-test analysis of a 10-year sodium heat pipe life test
- Predicted turbine heat transfer for a range of test conditions
- Predicted turbine heat transfer for a range of test conditions
- Prediction of heat and mass transfer in a rotating ribbed coolant passage with a 180 degree turn
- Prediction of nonuniform inlet temperature effects on vane and rotor heat transfer
- Prediction of relaminarization effects on turbine blade heat transfer
- Prediction of the thermal environment and thermal response of simple panels exposed to radiant heat
- Prediction of unshrouded rotor blade tip heat transfer : under cooperative agreement NCC3-370
- Quantitative examination of corrosion damage by means of thermal response measurements
- Quantitative global heat transfer in a Mach-6 quiet tunnel
- RL10A-3-3A rocket engine modeling project
- RL10A-3-3A rocket engine modeling project
- RP-2 thermal stability and heat transfer investigation for hydrocarbon boost engines
- Rapid fabrication of flat plate cavity phosphor thermography test models for shuttle return-to-flight aero-heating
- Re-architecting the NASA wire derating approach for space flight applications
- Recent progress in research pertaining to estimates of gas-side heat transfer in an aircraft gas turbine
- Ribbon-burner simulation of the T-700 turbine shroud section for ceramic-lined seals research
- Risk assessment and scaling for the SLS LH2 ET
- Risk assessment and scaling for the SLS LOx ET
- SSME bearing and seal tester data compilation, analysis, and reporting; and refinement of the cryogenic bearing analysis mathematical model : final report for Contract No.: NAS8-39379
- STARS, an integrated, multidisciplinary, finite-element, structural, fluids, aeroelastic, and aeroservoelastic analysis computer program
- Simulation of brush insert for leading-edge-passage convective heat transfer
- Simulations of turbine cooling flows using a multiblock-multigrid scheme : under cooperative agreement NCC3-370
- Sixth microgravity fluid physics and transport phenomena conference : abstracts
- Solar thermal concept evaluation : final technical report : NASA/Marshall Space Flight Center, NASA contract number H-17654D
- Space station systems technology study, final report
- Study of Gortler vortices by compact schemes, Part 1, Compact scheme for systems of equations applied to fundamental problems of mechanics of continua
- Study of critical heat flux and two-phase pressure drop under reduced gravity
- Summary of pressure gain combustion research at NASA
- Ten year operating test results and post-test analysis of a 1/10 segment stirling sodium heat pipe : phase III final report
- Testing, analysis, and code verification of aerodynamics and heat transfer related to turbomachinery : final report
- The effects of Reynolds number, rotor incidence angle and surface roughness on the heat transfer distribution in a large-scale turbine rotor passage
- The effects of Reynolds number, rotor incidence angle, and surface roughness on the heat transfer distribution in a large-scale turbine rotor passage
- The effects of inlet turbulence and rotor/stator interactions on the aerodynamics and heat transfer of a large-scale rotating turbine model : IV--aerodynamic data tabulation
- The prediction of nozzle performance and heat transfer in hydrogen/oxygen rocket engines with transpiration cooling, film cooling, and high area ratios
- The thermal-vortex equations : final report
- Thermal modeling and analysis of a cryogenic tank design exposed to extreme heating profiles
- Thermocapillary flow with evaporation and condensation at low gravity, Part 2, Deformable surface
- Thermocapillary flows and their stability : effects of surface layers and contamination
- Thermostructural analysis of unconventional wing structures of a Hyper-X hypersonic flight research vehicle for the Mach 7 mission
- Thermosyphon flooding in reduced gravity environments test results
- Three-dimensional Navier-Stokes simulations with two-equation turbulence models of intersecting shock-waves/turbulent boundary layer at Mach 8.3
- Transient characteristics of a grooved water heat pipe with variable heat load
- Turbine blade and vane heat flux sensor development phase II
- Turbine engine hot section technology 1986 : proceedings of a conference
- Turbine vane external heat transfer : final report
- Two dimensional heat transfer around penetrations in multilayer insulation : final report
- Two phase flow modeling : summary of flow regimes and pressure drop correlations in reduced and partial gravity
- Two-phase flows and heat transfer within systems with ambient pressure above the thermodynamic critical pressure
- ULTRA-SHARP nonoscillatory convection schemes for high-speed steady multidimensional flow
- WINCOF-I code for prediction of fan compressor unit with water ingestion
- Wind-tunnel measurements and comparison with flight of the boundary layer and heat transfer on a hollow cylinder at Mach 3
Embed
Settings
Select options that apply then copy and paste the RDF/HTML data fragment to include in your application
Embed this data in a secure (HTTPS) page:
Layout options:
Include data citation:
<div class="citation" vocab="http://schema.org/"><i class="fa fa-external-link-square fa-fw"></i> Data from <span resource="http://link.umsl.edu/resource/P8aA9jbaVaI/" typeof="CategoryCode http://bibfra.me/vocab/lite/Concept"><span property="name http://bibfra.me/vocab/lite/label"><a href="http://link.umsl.edu/resource/P8aA9jbaVaI/">Heat transfer</a></span> - <span property="potentialAction" typeOf="OrganizeAction"><span property="agent" typeof="LibrarySystem http://library.link/vocab/LibrarySystem" resource="http://link.umsl.edu/"><span property="name http://bibfra.me/vocab/lite/label"><a property="url" href="http://link.umsl.edu/">University of Missouri-St. Louis Libraries</a></span></span></span></span></div>
Note: Adjust the width and height settings defined in the RDF/HTML code fragment to best match your requirements
Preview
Cite Data - Experimental
Data Citation of the Concept Heat transfer
Copy and paste the following RDF/HTML data fragment to cite this resource
<div class="citation" vocab="http://schema.org/"><i class="fa fa-external-link-square fa-fw"></i> Data from <span resource="http://link.umsl.edu/resource/P8aA9jbaVaI/" typeof="CategoryCode http://bibfra.me/vocab/lite/Concept"><span property="name http://bibfra.me/vocab/lite/label"><a href="http://link.umsl.edu/resource/P8aA9jbaVaI/">Heat transfer</a></span> - <span property="potentialAction" typeOf="OrganizeAction"><span property="agent" typeof="LibrarySystem http://library.link/vocab/LibrarySystem" resource="http://link.umsl.edu/"><span property="name http://bibfra.me/vocab/lite/label"><a property="url" href="http://link.umsl.edu/">University of Missouri-St. Louis Libraries</a></span></span></span></span></div>
