Forest Products Laboratory (U.S.)
Resource Information
The organization Forest Products Laboratory (U.S.) represents an institution, an association, or corporate body that is associated with resources found in University of Missouri-St. Louis Libraries.
The Resource
Forest Products Laboratory (U.S.)
Resource Information
The organization Forest Products Laboratory (U.S.) represents an institution, an association, or corporate body that is associated with resources found in University of Missouri-St. Louis Libraries.
- Label
- Forest Products Laboratory (U.S.)
598 Items by the Organization Forest Products Laboratory (U.S.)
12 Items that are about the Organization Forest Products Laboratory (U.S.)
Context
Context of Forest Products Laboratory (U.S.)Creator of
No resources found
No enriched resources found
- Research in progress
- List of publications on wood preservation
- ... Wood handbook : basic information on wood as a material of construction with data for its use in design and specifications ...
- Forest Products Laboratory, 1910-2010 : celebrating a century of accomplishments
- Research Demonstration House and Carriage House : a walkthrough tour
- USDA Forest Products Laboratory Centennial Research Facility : an opportunity for innovation
- FPL news, recent developments from the Forest Products Laboratory
Contributor of
No resources found
No enriched resources found
- Service records on treated and untreated fenceposts
- Several nondestructive evaluation techniques for assessing stiffness and MOE of small-diameter logs
- Several nondestructive evaluation techniques for assessing stiffness and MOE of small-diameter logs
- Simulations of nonparametric analyses of predictor sort (matched specimens) data
- Accelerated aging of preservative-treated structural plywood
- Simulations of solid lumber strength property monitoring tests
- Acoustic emission and acousto-ultrasonic techniques for wood and wood-based composites : a review
- Small-diameter success stories
- Small-diameter success stories II
- Small-diameter success stories III
- Small-diameter trees used for chemithermomechanical pulps
- Softwood lumber prices for evaluation of small-diameter timber stands in the intermountain west
- Softwoods of North America
- Soil-contact decay tests using small blocks : a procedural analysis
- Acoustic tomography for decay detection in red oak trees
- Soil-contact decay tests using small blocks : a procedural analysis
- Solar energy for wood drying using direct or indirect collection with supplemental heating : a computer analysis
- Adhesives for bonding wood to metal
- Air drying of lumber
- Solid wood timber products consumption in major end uses in the United States, 1950-2009 : a technical document supporting the Forest Service 2010 RPA assessment
- Solid-color stains on western redcedar and redwood siding
- Some bivariate distributions for modeling the strength properties of lumber
- SouthPro, a computer program for managing uneven-aged loblolly pine stands
- Species identification and design value estimation of wooden members in covered bridges
- Air drying of lumber
- Specific gravity, moisture content, and density relationship for wood
- Alternative methods for sawing and drying structural lumber from second-growth loblolly pine (pinus taeda)
- Spin-out of veneer blocks during rotary cutting of veneer
- Stabilized engineered wood fiber for accessible trails : installation and serviceability results: Governor Dodge State Park, Wisconsin
- Stake tests of northeastern species treated with copper-based preservatives : five year results
- Standard plans for southern pine bridges
- Standard plans for timber bridge superstructures
- State of the art in biorefinery in Finland and the United States, 2008
- Statistical considerations in duration of load research
- Alternatives to chromated copper arsenate for residential construction
- Statistical determination of preservative threshold retention in soil block tests
- Statistical framework for comparing lumber sorting procedures
- Status and trends : profile of structural panels in the United States and Canada
- Status and trends for the U.S. forest products sector : a technical document supporting the Forest Service 2010 RPA assessment
- Alternatives to the Madison Formula, the original do-it-yourself semitransparent stain
- Steam-injection pressing of isocyanate-bonded aspen flakeboards : latitudes and limitations
- An assessment of training needs for the lumber manufacturing industry in the eastern United States
- Stiffness and strength properties of shear transfer plate connections
- Storage of aspen whole-tree chips under laboratory conditions
- Storage of lumber
- Strength and stiffness assessment of standing trees using a nondestructive stress wave technique
- Strength and stiffness assessment of standing trees using a nondestructive stress wave technique
- An evaluation of a proposed revision of the ASTM D 1990 grouping procedure
- Strength and stiffness of large-gap metal-plate wood connections
- Strength and stiffness of reinforced yellow-poplar glued-laminated beams
- Strength of bolted timber connections with steel side members
- Strength of mechanically fastened wood connections
- Strength tests on acetylated aspen flakeboards exposed to a brown-rot fungus
- Stress wave techniques for determining quality of dimensional lumber from switch ties
- Stress wave timing nondestructive evaluation tools for inspecting historic structures : a guide for use and interpretation
- Stress-laminated wood bridge decks : experimental and analytical evaluations
- An evolutionary history of oriented strandboard (OSB)
- Stripping paint from exterior wood surfaces
- Structural fire design : wood
- Monitoring of visually graded structural lumber
- Structural lumber properties of hybrid poplar
- Structural lumber properties of hybrid poplar
- Structural performance of light-frame roof assemblies : II. Conventional truss assemblies
- Structural wood products in onshore buildings at Naval Station Norfolk, 2000
- Studies in the genus Phellinus, I, The identity of Phellinus rickii with notes on its facultative synonyms
- Successful approaches to recycling urban wood waste
- Supporting rural wood industry through timber utilization research
- Sustainable economies and sustainable resources : roles for Forest Products research : September 27-29, 1993
- TT, a program that implements predictor sort design and analysis
- Monitoring of visually graded structural lumber
- TechLine
- Technology assessment of automation trends in the modular home industry
- Ten-year performance of treated northeastern softwoods in aboveground and ground-contact exposures
- The Colville study : wood utilization for ecosystem management : preliminary results of study of product potential from small-diameter stands
- Analysis of orthotropic beams
- The Colville study : wood utilization for ecosystem management : preliminary results of study of product potential from small-diameter stands
- The Mormon Creek Bridge : performance after three years
- The action of isolated brown-rot cell-free culture filtrate, H2O2-Fe++ and the combination of both on wood
- The bark-side/pith-side debate
- The decline and fall of type II error rates
- The detection of xylan in pulp fibers by energy-dispersive analysis and scanning electron microscopy
- The forest products conservation & recycling review
- The influence of moisture content on the flexural properties of southern pine dimension lumber
- The ins and outs of caulking
- The use of senescent cultures of postia placenta, gloeophyllum saepiarium, and gloeophyllum trabeum in the study of wood decay
- Multiple-bolted joints in wood members : a literature review
- Thermal degradation of fire-retardant-treated plywood : development and evaluation of a test protocol
- Thermal degradation of fire-retardant-treated plywood : development and evaluation of a test protocol
- Timber bridge economics
- Timber bridge economics
- Analysis of the part I Southern Pine In-Grade Program data
- Timber rivet connections in U.S. domestic species
- Timber rivets in structural composite lumber
- Timber rivets in structural composite lumber
- Time- and cost-saving apparatus for analytical sample filtration
- Time-based kiln drying schedule for sugar maple for structural uses
- Transverse vibration nondestructive testing using a personal computer
- Transverse vibrations of wood-based products : equations and considerations
- Treatability of native softwood species of the northeastern United States
- Treatability of underutilized northeastern species with CCA and alternative wood preservatives
- Analysis of thermal change in stress-laminated timber bridge decks
- Two- and three-parameter Weibull goodness-of-fit tests
- Two-year Wisconsin thermal loads for roof assemblies and wood, wood-plastic composite, and fiberglass shingles
- U.S. Forest Products Module : a technical document supporting the Forest Service 2010 RPA assessment
- Analysts guide to FEEMA for financial analysis of ecosystem management activities
- U.S. forest products annual market review and prospects
- U.S. forest products annual market review and prospects
- U.S. timber production, trade, consumption, and price statistics
- U.S. timber production, trade, consumption, and price statistics, 1965-1997
- U.S. timber production, trade, consumption, and price statistics, 1965-1999
- Analytical chemistry and microscopy laboratory
- U.S. timber production, trade, consumption, and price statistics, 1965-1999
- U.S. timber production, trade, consumption, and price statistics, 1965-2002
- U.S. timber production, trade, consumption, and price statistics, 1965-2005
- Assessment of research and technology transfer needs for wood-frame housing
- USDA Forest Products Laboratory's debris launcher
- Assessment of the environmental effects associated with wooden bridges preserved with creosote, pentachlorophenol, or chromated copper arsenate
- Assessment of the environmental effects associated with wooden bridges preserved with creosote, pentachlorophenol, or chromated copper arsenate
- United States housing
- Mycofibrillar cell wall extensions in the hyphal sheath of Postia placenta
- United States housing brief
- Assessment of the treatability of small-diameter grand fir posts
- United States housing, 2013
- United States paper, paperboard, and market pulp capacity trends by process and location, 1970-2000
- United States pulpwood receipts : softwood and hardwood, roundwood and residues, 1950-1989
- United States pulpwood receipts : softwood and hardwood, roundwood and residues, 1950-1996
- Urban tree and woody yard residues : another wood resource
- Use of green moisture content and basic specific gravity to group tropical woods for kiln drying
- Use of indexing to update U.S. annual timber harvest by state
- Use of laser scanning technology to obtain as-built records of historic covered bridges
- Use of wood energy for lumber drying and community heating in southeast Alaska
- Using life-cycle assessment to evaluate environmental impacts of briquette production from forest residues
- Nanocelluloses: potential materials for advanced forest products : proceedings of Nanotechnology in Wood Composites Symposium
- Asymptotically efficient estimation of a bivariate Gaussian-Weibull distribution and an introduction to the associated pseudo-truncated Weibull
- Using life-cycle assessment to evaluate environmental impacts of torrefied briquette production from forest residues
- Using transverse vibration nondestructive testing techniques to estimate stiffness and strength of southern pine lumber
- Bats, people, and buildings : issues and opportunities
- VENVAL, a plywood mill cost accounting program
- Variability in evaluating environmental impacts of treated wood
- Response of flakeboard properties to changes in steam injection pressing environments
- Veneer cutting and drying properties of water oak
- Waste-wood-derived fillers for plastics
- Water repellents and water-repellent preservatives for wood
- Weathering performance of finished southern pine plywood siding
- Western hardwoods : value-added research and demonstration program
- Why house paint fails
- Before you install exterior wood-based siding
- Wood Protection Research Council : research priorities 2013
- Wood and timber condition assessment manual
- Behavior of stress-laminated parallel-chord timber bridge decks : experimental and analytical studies
- Wood floors for dwellings
- Wood handbook : basic information on wood as a material of construction with data for its use in design and specification
- Wood handbook : basic information on wood as a material of construction with data for its use in design and specification
- Wood handbook : wood as an engineering material
- Wood handbook : wood as an engineering material
- Wood joist floors : probabilistic analysis of joist stiffness measured at retail lumberyards
- Wood products used for residential repair and remodeling in the United States, 1991
- Wood shakes and shingles for roof applications : tips for longer life
- Wood-based panel plant locations and timber availability in selected U.S. states
- Wood-based paneling as thermal barriers
- Wood-frame house construction
- Workflow for publishing forestry LCI Data through the LCA Commons : a case study
- Bending performance of spliced, nailed-laminated posts
- Wyoming--Colorado technical assistance visit trip report
- Yellow Popular glulam timber beam performance
- Yield losses from sawmill scanner error
- Bending properties of four-layer nail-laminated posts
- Bending properties of reinforced and unreinforced spliced nail-laminated posts
- National Conference on Wood Transportation Structures
- Bending strength of vertically glued laminated beams with one to five plies
- Bioconversion of woody biomass to biofuel and lignin co-product using sulfite pretreatment to overcome the recalcitrance of lignocelluloses (SPORL)
- National Conference on Wood Transportation Structures : preliminary program and registration, October 23-25, 1996, Madison, Wisconsin
- Biological resistance of southern pine and aspen flakeboards made from acetylated flakes
- National forests of Wisconsin : demographics and recreation participation
- Biomass determination using wood specific gravity from increment cores
- Biopulping : a glimpse of the future?
- Bolted connection strength and bolt hold size
- National forests of Wisconsin : demographics and recreation participation
- Bondability of ipe (Tabebuia spp.) wood using ambient-curing exterior wood adhesives
- Bondability of wood surfaces
- Build green : wood can last for centuries
- Newsline
- Butt joint reinforcement in parallel-laminated veneer (PLV) lumber
- CVal : a spreadsheet tool to evaluate the direct benefits and costs of carbon sequestration contracts for managed forests
- Cantilever-beam dynamic modulus for wood composite products
- Capacity, production, and manufacture of wood-based panels in the United States and Canada
- Capacity, production, and manufacturing of wood-based panels in North America
- Cellulose nanocrystal entrapment of benzalkonium chloride in southern pine : biological, chemical, and physical properties
- Nondestructive assessment of single-span timber bridges using a vibration-based method
- Censoring data for resistance factor calculations in load and resistance factor design : a preliminary study
- Challenges in converting among log scaling methods
- ChargeOut! : determining machine and capital equipment charge-out rates using discounted cash-flow analysis
- Chemical yields from low-temperature pyrolysis of CCA-treated wood
- Choosing and applying fire-retardant-treated plywood and lumber for roof designs
- Chronicle of 65 years of wood finishing research at the Forest Products Laboratory
- Review of alternative measures of softwood sawtimber prices in the United States
- Chronicles of Fibroporia radiculosa (= Antrodia radiculosa) TFFH 294
- Cold temperature effects on stress-laminated timber bridges : a laboratory study
- Commentary on factors affecting transverse vibration using an idealized theoretical equation
- Comparative life-cycle assessment of biochar activated carbon and synthesis gas electricity with commercially available alternatives
- Nondestructive assessment of wood members in a viewing tower in Potawatomi State Park, Door County, Wisconsin, USA
- Comparison of wood preservatives in stake tests
- Review of end grain nail withdrawal research
- Compartment fire testing of a two-story mass timber building
- Nondestructive evaluation of wood
- Composite panels made with biofiber or office wastepaper bonded with thermoplastic and/or thermosetting resin
- Nondestructive methods for detecting defects in softwood logs
- Computer optimization of cutting yield from multiple-ripped boards
- Concerns about a variance approach to the X-ray diffractometric estimation of microfibril angle in wood
- Condensed tannins : base-catalysed reactions of polymeric procyanidins with phloroglucinol : intramolecular rearrangements / Peter E. Laks and Richard W. Hemingway, Anthony H. Conner
- Condition assessment of a 2,500-year-old mummy coffin
- Condition assessment of a historic trout rearing station in upper Michigan
- Nondestructive methods for detecting defects in softwood logs
- Condition assessment of main structural members of steam schooner WAPAMA
- Condition assessment of roof trusses of Quincy Mine Blacksmith shop in Keweenaw National Historical Park
- Conditioning stress development and factors that influence the prong test
- Conditioning stress development and factors that influence the prong test
- Review of in-service moisture and temperature conditions in wood-frame buildings
- Confidence bounds and hypothesis tests for normal distribution coefficients of variation
- Confidence bounds for normal and lognormal distribution coefficients of variation
- Confidence intervals for predicting lumber strength properties based on ratios of percentiles from two Weibull populations
- Conserving our forests since 1910
- Considerations in the development of a trade model for the pulp and paper sector
- Construction of a dip-tank for finishing wood siding or decking
- Continuous ethanol production from d-Xylose by Candida shehatae
- Controlling decay in waterfront structures : evaluation, prevention, and remedial treatments
- Nondestructive methods of evaluating quality of wood in preservative-treated piles
- Conversion of board foot scaled logs to cubic meters in Washington state, 1970-1998
- Nondestructive testing for assessing wood members in structures : a review
- Corrosion of fasteners in wood treated with newer wood preservatives
- Cost and time study for constructing raised wood floor systems in the Gulf Coast region of the United States
- Review of log sort yards
- Covered bridge security manual
- Nondestructive testing technique to quantify deterioration from marine borer attack in Sitka spruce and Western hemlock logs : observations from a pilot test
- Creation of a large database with IAWA standard list characters
- Creep and creep-rupture behavior of wood-based structural panels
- Creep behavior of structural insulated panels (SIPs) : results from a pilot study
- Creep testing of structural composite panels : a literature review and proposed standards
- Creosote retention levels of timber highway bridge superstrcutures in Michigan's Lower Peninsula
- North America's wood pellet sector
- Criterion 6, indicator 25 : value and volume of wood and wood products production, including primary and secondary processing
- Review of test methods used to determine the corrosion rate of metals in contact with treated wood
- Criterion 6, indicator 30 : value and volume in round wood equivalents of exports and imports of wood products
- Criterion 6, indicator 32 : exports as a share of wood and wood products production and imports as a share of wood and wood products production
- Criterion 6, indicator 33 : recovery or recycling of forest products as a percentage of total forest products consumption
- Death-watch and spider beetles of Wisconsin, Coleoptera: Ptinidae
- North American wood waste forum : summary of group feedback, February 2-3, 2012
- Decay fungi and wounding in advance grand and white fir regeneration
- Delamination of edge-glued wood panels : moisture effects
- Northeast economic data and retrieval system
- Density and specific gravity metrics in biomass research
- Derivation of nominal strength for wood utility poles
- Design curves for the buckling of sandwich cylinders of finite length under uniform external lateral pressure
- Occurrence of mold in a two-story wood-frame house operated at design indoor humidity levels
- Design, performance, and installation of a Press-Lam basement beam in a factory-built house
- Operation and cost of a small dehumidification dry kiln
- Designated fiber stress for wood poles
- Outdoor furniture, artwork, fences, and play equipment
- Determination of mechanical properties of adhesives for use in the design of bonded joints
- Developing and commercializing sustainable new wood products : a process for identifying viable products
- Developing inventory projection models using empirical net forest growth and growing-stock density relationships across U.S. regions and species groups
- PELPS III, a microcomputer price endogenous linear programming system for economic modeling : version 1.0
- Development of a ready-to-assemble tornado shelter from cross-laminated timber (CLT) : impact and wind pressure testing
- Paint as a vapor barrier for walls of older homes
- Development of a six-year research needs assessment for timber transportation structures
- Review of thickness swell in hardboard siding : effect of processing variables
- Development of a smart timber bridge (phase III) : moisture and strain sensor investigation for historic covered bridges
- Development of a smart timber bridge--a five-year plan
- Development of new microwave-drying and straightening technology for low-value curved timber
- Diagnostic guide for evaluating surface distortions in veneered furniture and cabinetry
- Differential reliability : probabilistic engineering applied to wood members in bending/tension
- Paint, stain, varnish, or preservative? : it's your choice
- Diffusion coefficient of porous solid obtained from isothermal sorption tests
- Distribution of borates around point source injections in wood members exposed outside
- Dividends from wood research
- Dividends from wood research
- Dowel bearing strength
- Dowel-nut connection in Douglas-fir peeler cores
- Review of wood-based panel sector in United States and Canada
- Dowel-nut connection in Douglas-fir peeler cores
- Dry kiln : operator's manual
- Dry kiln operator's manual
- Drying eastern hardwood lumber
- Durability of hardboard lap siding : determination of performance criteria
- Durability of hardboard lap siding : performance in laboratory testing and in long-term exterior exposure
- Papermaking factors that influence the strength of linerboard weight handsheets
- Durability of preservative-treated wood utility poles in Guam
- Performance Red Maple glulam timber beams
- Duration of load on bolted joints : a pilot study
- Performance characteristics of borate fatty acid formulations as mold inhibitors
- Economic feasibility of products from inland west small-diameter timber
- Effect of air velocity on the drying rate of single eastern white pine boards
- Effect of dilute acid on the accelerated weathering of wood
- Effect of drying methods on warp and grade of 2 by 4's from small-diameter ponderosa pine
- Effect of drying temperature on warp and downgrade of 2 by 4's from small-diameter ponderosa pine
- Role of construction debris in release of copper, chromium, and arsenic from treated wood structures
- Effect of fire-retardant treatment and redrying on the mechanical properties of douglas-fir and aspen plywood
- Effect of fusiform rust (Cronartium quercuum f.sp. fusiforme) on the composition of loblolly pine lignin
- Sawmill closures, openings, and net capacity changes in the softwood lumber sector, 1996-2003
- Effect of moisture content on nail bearing strength
- Effect of moisture content on nail bearing strength
- Performance of Red Maple glulam timber beams
- Effect of moisture content on warp in hardwood 2 by 6's for structural use
- Performance of back-primed and factory-finished hardboard lap siding in southern Florida
- Effect of moisture content on warp in hardwood 2 by 6's for structural use
- Effect of prestain on the release rate of copper, chromium, and arsenic from western hemlock
- Effect of prestain on the treatability of western hemlock with chromated copper arsenate
- Pest risk assessment of the importation into the United States of unprocessed Pinus and Abies logs from Mexico
- Effect of restraint during drying on the tensile properties of handsheets
- Effect of various proportions of juvenile wood on laminated veneer lumber
- Physical deterioration of preservative treated poles and pilings exposed to salt water
- Effect of various proportions of juvenile wood on laminated veneer lumber
- Effect of wet bulb depression on heat sterilization time of slash pine lumber
- Effect of wet bulb depression on heat sterilization time of slash pine lumber
- Effects of acid deposition on wood
- Plans for crash-tested bridge railings for longitudinal wood decks
- Effects of cedar oil and silica gel treatment on dimensional stability and mechanical properties of southern yellow pine boards
- Effects of fire retardant chemicals on the bending properties of wood at elevated temperatures
- Plans for crash-tested bridge railings for longitudinal wood decks on low-volume roads
- Effects of fire retardant treatments after 18 months of exposure at 1500F (660C)
- Effects of uneven-aged and diameter-limit management on West Virginia tree and wood quality
- Effects of water flow rate and temperature on leaching from creosote-treated wood
- Effects on U.S. timber outlook of recent economic recession, collapse in housing construction, and wood energy trends
- Plans for crash-tested wood bridge railings for concrete decks
- Efficacy of a borax-copper preservative in exposed applications
- Efficient utilization of red maple lumber in glued-laminated timber beams
- Efficient utilization of red maple lumber in glued-laminated timber beams
- Polycyclic aromatic hydrocarbon migration from creosote-treated railway ties into ballast and adjacent wetlands
- Elastic stability of cylindrical sandwich shells under axial and lateral load
- Potential for coal power plants to co-fire with woody biomass in the U.S. north, 2010-2030 : a technical document supporting the Northern Forest Futures Project
- Energy and minerals industries in national, regional, and state economics
- Energy and minerals industries in national, regional, and state economies
- Energy efficiency in light-frame wood construction
- Role of construction debris in release of copper, chromium, and arsenic from treated wood structures
- Energy harvesting from wood floor vibration using a piezoelectric generator
- Power calculations in the predictor sort computer program
- Engineering properties of Douglas-fir lumber reclaimed from deconstructed buildings
- Environmental impact of preservative-treated wood in a wetland boardwalk
- Enzymatic "combustion" : the microbial degradation of lignin1,2
- Enzymatic combustion : the degradation of lignin by white-rot fungi
- Equilibrium moisture content of wood in outdoor locations in the United States and worldwide
- Estimated annual timber products consumption in major end uses in the United States, 1950-2006
- Estimating Janka hardness from specific gravity for tropical and temperate species
- Estimating air drying times of lumber with multiple regression
- Estimating air drying times of lumber with multiple regression
- Estimating air drying times of samll-diameter ponderosa pine and Douglas-fir logs
- Estimating the board foot to cubic foot ratio
- Estimating tree biomass, carbon, and nitrogen in two vegetation control treatments in an 11-year-old Douglas-fir plantation on a highly productive site
- Predicting bending strength of fire-retardant-treated plywood from screw-withdrawal tests
- Evaluating fire-damaged components of historic covered bridges
- Predicting bending strength of fire-retardant-treated plywood from screw-withdrawal tests
- Role of pigment concentration in the weathering of semitransparent stains
- Evaluating naturally durable wood species for repair and rehabilitation of above-ground components of covered bridges
- Evaluating shrinkage of wood propellers in a high-temperature environment
- Evaluating the use of drones for timber bridge inspection
- Evaluating wood-based composites for incipient fungal decay with the immunodiagnostic wood decay test
- Evaluation of creep performance of structural insulated panels (SIPs : phase 2
- Predictor sort sampling and confidence bounds on quantiles I : asymptotic theory
- Evaluation of flakeboard bonded with xylitol-modified alkaline phenolic resin
- Evaluation of nonpressure wood preservatives for military applications
- Predictor sort sampling, tight t's, and the analysis of covariance : theory, tables, and examples
- Evaluation of silvicultural treatments and biomass use for reducing fire hazard in western states
- Evaluation of the high-heel roof-to-wall connection with extended OSB wall sheathing
- Role of wood production in ecosystem management : proceedings of the Sustainable Forestry Working Group at the IUFRO All Division 5 Conference, Pullman, Washington, July 1997
- Evaluation of wood species and preservatives for use in Wisconsin highway sign posts
- Preservative treatment of wood for farm use
- Evolution of standardized procedures for adjusting lumber properties for change in moisture content
- Experimental assessment of wood trusses with square-end webs
- Experimental shear strength of glued-laminated beams
- Procedures for developing allowable properties for a single species under ASTM D1990 and computer programs useful for the calculations
- Experimental shear strength of unchecked solid-sawn douglas-fir
- Experimental shear strength of unchecked solid-sawn douglas-fir
- Exploring the possibilities of pulp & paper : shared use of the FPL Laboratories
- Exterior wood in the south : selection, applications, and finishes
- FORTRAN programs for reliability analysis
- FPL dynamic compression testing equipment for testing package cushioning materials
- Procedures for estimation of Weibull parameters
- FPL roof temperature and moisture model : description and verification
- Roof connections in houses : key to wind resistance
- FPL roof temperature and moisture model : description and verification
- FPL-PELPS : a price endogenous linear programming system for economic modeling, supplement to PELPS III, version 1.1
- Factors affecting oxidative stain in soft maple (Acer rubrum L.)
- Feasibility of producing value-added wood products from reclaimed hemlock lumber
- Fermentation of hemicellulosic sugars and sugar mixtures by Candida shehatae
- Fiber stress values for design of glulam timber utility structures
- Field moisture performance of wood-framed walls with exterior insulation in a cold climate
- Proceedings Mass Timber Research Workshop 2015 : USDA Forest Products Laboratory, Madison, Wisconsin, USA, November 3-4, 2015
- Field performance of timber bridges, 1, Birchlog Run and Tumbling Rock Run stress-laminated deck bridge
- Field performance of timber bridges, 1, Teal River stress-laminated deck bridge
- Field performance of timber bridges, 1, Teal River stress-laminated deck bridge
- Proceedings, meeting society's needs through forest products technology marketing : Technology Transfer National Workshop, November 7-10, 1994, USDA Forest Products Laboratory, Madison, Wisconsin
- Proceedings, sixth international symposium : moisture and creep effects on paper, board, and containers : Madison, Wisconsin, USA, 14-15 July 2009
- Field performance of timber bridges, 10, Sanborn Brook stress-laminated deck bridge
- Field performance of timber bridges, 10, Sanborn Brook stress-laminated deck bridge
- Field performance of timber bridges, 11, Spearfish Creek stress-laminated box-beam bridge
- Profile ..., softwood sawmills in the United States and Canada
- Field performance of timber bridges, 12, Christian Hollow stress-laminated box-beam bridge
- Field performance of timber bridges, 13, Mohawk Canal stress-laminated bridge
- Profile 1999 : softwood sawmills in the United States and Canada
- Field performance of timber bridges, 13, Mohawk Canal stress-laminated bridge
- Field performance of timber bridges, 14, Dean, Hibbsville, and Decatur stress-laminated deck bridges
- Field performance of timber bridges, 15, Pueblo County, Colorado, stress-laminated deck bridge
- Profile 2001 : softwood sawmills in the United States and Canada
- Field performance of timber bridges, 16, North Siwell Road stress-laminated bridge
- Profile 2003 : softwood sawmills in the United States and Canada
- Field performance of timber bridges, 16, North Siwell Road stress-laminated bridge
- Field performance of timber bridges, 17, Ciphers stress-laminated deck bridge
- Properties related to drying defects in red oak wetwood
- Field performance of timber bridges, 18, Byron stress-laminated truss bridge
- Field performance of timber bridges, 19, North Yarmouth stress-laminated truss bridge
- Field performance of timber bridges, 2, Cooper Creek stress-laminated deck bridge
- Protection of wood surfaces with chromium trioxide
- Field performance of timber bridges, 20, Gray stress-laminated deck bridge
- Field performance of timber bridges, 20, Gray stress-laminated deck bridge
- Field performance of timber bridges, 21, Humphrey stress-laminated T-beam bridge
- Field performance of timber bridges, 4, Graves Crossing stress-laminated deck bridge
- Field performance of timber bridges, 4, Graves Crossing stress-laminated deck bridge
- Roof temperature histories in matched attics in Mississippi and Wisconsin
- Field performance of timber bridges, 5, Little Salmon Creek stress-laminated deck bridge
- Field performance of timber bridges, 5, Little Salmon Creek stress-laminated deck bridge
- Pulp capacity in the United States, 2000
- Roof temperature histories in matched attics in Mississippi and Wisconsin
- Field performance of timber bridges, 6, Hoffman Run stress-laminated deck bridge
- Field performance of timber bridges, 6, Hoffman Run stress-laminated deck bridge
- Pulpability of beetle-killed spruce
- Field performance of timber bridges, 7, Connell Lake stress-laminated deck bridge
- Field performance of timber bridges, 8, Lynches Wood Park stress-laminated deck bridge
- Pulpability of beetle-killed spruce
- Field performance of timber bridges, 9, Big Erick's stress-laminated deck bridge
- Field performance of timber bridges, 9, Big Erick's stress-laminated deck bridge
- Quality drying in a hardwood lumber predryer : guidebook-checklist
- Field performance testing of improved engineered wood fiber surfaces for accessible playground areas
- Finishes for wood bowls, butcher blocks, and other items used for food
- Finishes for wood decks
- Fire endurance model for a metal-plate-connected wood truss
- Quality drying of hardwood lumber : guidebook-checklist
- Fire performance of structural flakeboard from forest residue
- Fire performance of wood treated with combined fire-retardant and preservative systems
- Fire performance of wood treated with combined fire-retardant and preservative systems
- Quality drying of softwood lumber : guidebook-checklist
- Fire resistance of engineered wood rim board products
- Fire resistance of structural composite lumber products
- Flake furnish characterization : modeling board properties with geometric descriptors
- Flake storage effects on properties of laboratory-made flakeboards
- Flexural properties of laminated veneer lumber manufactured from ultrasonically rated red maple veneer : a pilot study
- Quantifying trade-offs between economic and ecological objectives in uneven-aged mixed-species forests in the southern United States
- Forest Products Laboratory : restoring America's forests through the wise use of wood
- Railroad tie decay : comprising The Decay of ties in storage
- Forest Products Laboratory contributions to the use of Weibull distribution in wood engineering
- Forest Products Laboratory research program on small-diameter material
- Forest Products Laboratory, 1910-2010 : celebrating a century of accomplishments
- Forest products from Latin America : an almanac of the state of the knowledge and the state of the art
- Forest products from Latin America : annotated bibliography of world literature on research, industry, and resource of Latin America, 1915 to 1989
- Forest products laboratory research program on small-diameter material
- Forest products research and development organizations in a worldwide setting : a review of structure, governance, and measures of performance of organizations outside the United States
- Formation and properties of juvenile wood in southern pines : a synopsis
- Fuel to burn : economics of converting forest thinnings to energy using BioMax in southern Oregon
- Fuels for schools : case study in Darby, Montana
- Fundamentals of composite processing : proceedings of a workshop
- Fungal treatment bulletin
- Globalization and structural change in the U.S. forest sector : an evolving context for sustainable forest management
- Grading options for Western hemlock "pulpwood" logs from Southeastern Alaska
- Recommended veneer grades for the development of hardwood veneer log grades
- Grading options for Western hemlock "pulpwood" logs from southeastern Alaska
- Gripped-end effect in tension proof testing of dimension lumber
- Growth model for uneven-aged loblolly pine stands : simulations and management implications
- Guide for in-place treatment of wood in historic covered and modern bridges
- Recovery of paper and wood for recycling : actual and potential
- Guide for materials selection and design for metals used in contact with copper-treated wood
- Guide for use of wood preservatives in historic structures
- Guidelines for design, installation, and maintenance of a waterproof wearing surface for timber bridge decks
- Hardwoods of North America
- Heat sterilization time of Ponderosa pine and Douglas-fir boards and square timbers
- Heat sterilization times of five hardwood species
- Heat treatment of firewood : meeting the phytosanitary requirements
- Heat-treatment options and heating times for ash firewood
- Heating times for round and rectangular cross sections of wood in steam
- History of lumber submissions under ASTM D 1990 since the North American in-grade testing program
- Honeycomb and surface check detection using ultrasonic nondestructive evaluation
- How some test variables affect bending, tension, and compression values for particle panel products
- Recycling and long-range timber outlook : background research report, 1993 RPA assessment update USDA Forest Service
- How to treat fence posts by double diffusion
- Hygrothermal analysis of wood-frame wall assemblies in a mixed-humid climate
- Recycling of wood and paper products in the United States
- Identifying bacterially infected oak by stress wave nondestructive evaluation
- Recycling research progress at the Forest Products Laboratory
- Identifying bacterially infected oak by stress wave nondestructive evaluation
- Impact of changing solid wood products technology on timber values
- Improved performance of Southern Pine structural glued-laminated timber
- Reduction of oxidative stain in Ochoó (Hura crepitans L.) : Reducción de la manca de oxidación en Ochoó (Hura crepitans L.)
- Improved understanding of moisture effects on outdoor wood-adhesive bondlines
- Improved utilization of small-diameter ponderosa pine in glued-laminated timber
- Improving engineered wood fiber surfaces for accessible playgrounds
- Regional softwood sawmill processing variables as influenced by productive capacity
- Improving sawing accuracy does help
- Industrial wood productivity in the United States, 1900-1998
- Industry-prioritized research, technology transfer, and education needs and opportunities in residential construction
- Regional variations in housing characteristics and wood products consumption for residential construction in the United States
- Influence of anatomical, physical, and mechanical properties of diffuse-porous hardwoods on moisture durability of bonded assemblies
- Regulatory and policy issues for reuse and remanufacture of wood materials coated with lead-based paint
- Influence of chuck design on spin-out torque in softwood veneer peeling blocks
- Influence of juvenile wood content on shear parallel, compression, and tension transverse to grain strength and mode I fracture toughness for loblolly pine
- Inside wood : a short trip into the interior for the layman
- Relationship between stress wave transmission time and compressive properties of timbers removed from service
- Inspection of timber bridges using stress wave timing nondestructive evaluation tools : a guide for use and interpretation
- Installation, care, and maintenance of wood shake and shingle roofs
- Relative drying times of 650 tropical woods : estimation by green moisture content, specific gravity, and green weight density
- Installation, care, and maintenance of wood shake and shingle siding
- Reminder about potentially serious problems with a type of blocked ANOVA analysis
- Installing sealants for long service life
- Integrating net-zero energy and high-performance green building technologies into contemporary housing in a cold climate
- Internal moisture content and temperature of standardized aboveground wood durability test specimens
- SIP shear walls : cyclic performance of high-aspect-ratio segments and perforated walls
- Investigating the use of small-diameter softwood as guardrail posts : static test results
- Investigation of fundamentals of two-stage, dilute sulfuric acid hydrolysis of wood
- Investigation of historic equilibrium moisture content data from the Forest Products Laboratory
- Report of the Intelligent Consumption Project : a collaborative project of the Wisconsin Academy of Sciences, Arts and Letters and the USDA Forest Service, Forest Products Laboratory
- Investment opportunity : best opening face sawing
- Reporting of fire incidents in heavy timber structures
- Iron stain on wood
- JMFA 2--a graphically interactive Java program that fits microfibril angle x-ray diffraction data
- JMFA--a graphically interactive java program that fits microfibril angle x-ray diffraction data
- Janka hardness using nonstandard specimens
- Kiln drying lumber in the United States : a survey of volume, kiln capacity, equipment, and procedures, 1992-1993
- LSY : documentation for a spreadsheet tool to evaluate log-sort yard economics
- Labor demand by forest products industries : a review
- Lam I-joists : a new structural building product from small-diameter, fire-prone timber
- LamLum : a tool for evaluating the financial feasibility of laminated lumber plants
- Roof temperatures in simulated attics
- Laser scanning technology as part of a comprehensive condition assessment for covered bridges
- Lateral load performance of structural insulated panel (SIP) diaphragms
- Leaching of wood preservative components and their mobility in the environment : summary of pertinent literature
- Life-cycle assessment of redwood decking in the United States with a comparison to three other decking materials : final report
- Life-cycle cost analysis of a mass timber building : methodology and hypothetical case study
- Life-cycle energy and GHG emissions for new and recovered softwood framing lumber and hardwood flooring considering end-of-life scenarios
- Research accomplishments for wood transportation structures based on a national research needs assessment
- Life-cycle inventory and assessment research at the Forest Products Laboratory : wood products used in building construction
- Light-frame wall and floor systems : analysis and performance
- Literature review on use of nonwood plant fibers for building materials and panels
- Live load distribution on longitudinal glued-laminated timber deck bridges : final report : conclusions and recommendations
- Live-sawing low-grade red oak logs
- Log sort yard economics, planning, and feasibility
- Long-term effects of elevated carbon dioxide concentration on sour orange wood specific gravity, modulus of elasticity, and microfibril angle
- Long-term effects of elevated carbon dioxide on sour orange tree specific gravity and anatomy
- Long-term performance monitoring of hardwood timber bridges in Pennsylvania
- Longevity of chloropicrin and vapam in controlling internal decay in creosoted Douglas-fir timbers above ground
- Lumber defect detection by ultrasonics
- Lumber processing in selected sawmills in Durango and Oaxaca, Mexico
- Lumber recovery from Pacific yew logs : an exploratory study
- Machine grading of lumber : practical concerns for lumber producers
- Manufacture of veneer and plywood from United States hardwoods with special reference to the South
- Marine exposure of preservative-treated small wood panels
- Market analysis of erosion control mats
- Mass spectrometric method to determine the chain length of oligosaccharides attached to phenolic polymers by nonglycosidic linkages
- Material variability and repetitive member allowable property adjustments in forest products engineering
- Maximum cutting yields for 6/4 ponderosa pine vertical grain lumber
- Research needs assessment for the mass timber industry : proceedings fo the 2nd North American Mass Timber Research Needs Workshop
- Roof temperatures in simulated attics
- Maximum likelihood estimation of the parameters of a bivariate Gaussian-Weibull distribution from machine stress-rated data
- Research on biodeterioration of wood, 1987-1992, I, Decay mechanisms and biocontrol
- Mean and tolerance limit stresses and stress modeling for compression perpendicular to grain in hardwood and softwood species
- Measurement of flake alignment in flakeboard with grain angle indicator
- Mechanical grading of 6-inch-diameter lodgepole pine logs for the Traveler's Rest and Rattlesnake Creek bridges
- Mechanical property ratios : a measure of flake alignment
- Mechanical properties of salvaged dead yellow-cedar in southeast Alaska : phase 1
- Research on biodeterioration of wood, 1987-1992, II, Diagnosis of decay and in-place treatments
- Method for adjusting warp measurements to a different board dimension
- Method to estimate dry-kiln schedules and species groupings : tropical and temperate hardwoods
- Research, technology transfer, and education needs assessment for non-residential wood structures in California
- Method to estimate dry-kiln schedules and species groupings : tropical and temperate hardwoods
- Mill glaze : myth or reality?
- Modeling integrated biomass gasification business concepts
- Residential tornado safe rooms from commodity wood products : wall development and impact testing
- Modeling longrun housing demand by type of unit and region
- Sawing hardwoods in five tropical countries
- Modeling prong test response during conditioning of red oak lumber
- Resistance moisture meter correction factors for four tropical wood species
- Moisture conditions in walls and ceilings of a simulated older home during winter
- Moisture content and the properties of clear southern pine
- Moisture content and the properties of lodgepole pine logs in bending and compression parallel to the grain
- Resistance of borax-copper treated wood in aboveground exposure to attack by Formosan subterranean termites
- Moisture content and the shrinkage of lumber
- List of publications, no. 704
- A fit of a mixture of bivariate normals to lumber stiffness : strength data
- A low-cost window--without jambs
- Sawn hardwood stock treated by double-diffusion and modified double-diffusion
- Sawtooth forces in cutting tropical hardwoods native to South America
- A process to establish and use base period prices for national forest system transaction evidence timber appraisal
- Science supporting the economic and environmental benefits of using wood and wood products in green building construction